Modding need your help guys

Discussion in 'Modding' started by leviathan18, 25 Jun 2005.

  1. leviathan18

    leviathan18 What's a Dremel?

    Joined:
    17 Mar 2005
    Posts:
    237
    Likes Received:
    0
    i was looking some time ago a thread and a guy showed a super bright red led he had just one led and was enough to light the hole case but i can remember the thread or the kind of led he used i just can remember it was red super bright and he needed to put some mosfest to cold the leds any idea what kind of led it can be?
     
  2. foxx

    foxx What's a Dremel?

    Joined:
    5 Sep 2004
    Posts:
    785
    Likes Received:
    0
    Sounds like he used a luxeon led, hope that helped
     
  3. leviathan18

    leviathan18 What's a Dremel?

    Joined:
    17 Mar 2005
    Posts:
    237
    Likes Received:
    0
    ive seen luxeon are the brigther ones right now?
     
  4. Bandit_zoraK

    Bandit_zoraK What's a Dremel?

    Joined:
    29 Nov 2004
    Posts:
    267
    Likes Received:
    0
    Here's the worklog, super bright luxeons, there are a few links on this page. Hope that helps.
     
  5. Ghlargh

    Ghlargh What's a Dremel?

    Joined:
    16 Nov 2003
    Posts:
    276
    Likes Received:
    0
    Technically, luxeons (without the lens) are not the brightest LEDs, but they are the LEDs with the most light output.

    They put out their light over about a 140 degree angle while smaller 5mm super bright LEDs can have the light concentrated into a 10 degree beam, making the smaller LED much brighter in it's restricted beam, while the luxeon can illuminate a much larger area.
     
  6. leviathan18

    leviathan18 What's a Dremel?

    Joined:
    17 Mar 2005
    Posts:
    237
    Likes Received:
    0
    bandit thnak you very very very much that is the one i was looking for :D
     

Share This Page