Overclocking Overclocking HD5770

Discussion in 'Hardware' started by GingerFox, 4 Jan 2010.

  1. GingerFox

    GingerFox What's a Dremel?

    Joined:
    15 Nov 2009
    Posts:
    570
    Likes Received:
    18
    Anyone got one that they have overclocked? If so what did you get it too?

    Just a general wonderence to see where i might be able to get mine to:)
     
  2. Bloodburgers

    Bloodburgers Minimodder

    Joined:
    30 Apr 2009
    Posts:
    177
    Likes Received:
    0
    have you tried using the catalyst auto utility or riva tuner?
     
  3. LithiumDesign

    LithiumDesign 3dsMax User

    Joined:
    23 Jul 2009
    Posts:
    665
    Likes Received:
    23
    Using ATI Overdrive:
    [​IMG]
    Dunn if it is good or not but its stable, the fans is a little loud though :p
     
  4. GingerFox

    GingerFox What's a Dremel?

    Joined:
    15 Nov 2009
    Posts:
    570
    Likes Received:
    18
    It maxes out in overdrive (well the gpu does, i got bord of waiting for the memory to slowly bench) so i was wondering about out of overdrive?
     
  5. Guest-44432

    Guest-44432 Guest

    Unless you are using water cooling to keep those temps down I would not bother overclocking, as it don't give you that much of an improvement. 1-2fps. Hardly worth burning out your card for.

    Simon
     
  6. TheHalfWit

    TheHalfWit Call me dino

    Joined:
    25 Aug 2009
    Posts:
    88
    Likes Received:
    3
    I've got mine stable at 900gpu and 1300 for the memory, my rooms just a little hot at the moment, I had it downstairs where its probably around 10 degrees c colder and I had it running stable at 1ghz on the gpu and 1300 on the memory.

    note: I adjusted the voltage a bit to get it to run at 1ghz.
     
  7. GingerFox

    GingerFox What's a Dremel?

    Joined:
    15 Nov 2009
    Posts:
    570
    Likes Received:
    18
    Aha very helpful, what program did you use to adjust the voltage? (not that i would sounds risky, but out of interest)
     
  8. Des0lution

    Des0lution What's a Dremel?

    Joined:
    13 Mar 2010
    Posts:
    1
    Likes Received:
    0
    Download MSI Afterburner, edit the config file from... EnableUnofficialOverclocking = 0 to =1

    I've overvolted mine to 1.3v and have currently got gpu clock at 1ghz and memory clock at 1450mhz, 3 runs of crysis benchmark on very high, max temp 63 degrees, with stock cooler

    have found a waterblock for 50(GBP) might invest ;)
     

Share This Page