1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Overclocking Results: Super-PI Challenge! (please read the first post)

Discussion in 'Hardware' started by Tim S, 8 Sep 2003.

Page 62 of 78
  1. Highland3r

    Highland3r Minimodder

    Joined:
    25 Jul 2003
    Posts:
    7,559
    Likes Received:
    16
    Thats a damn fine winny you got yourself there!
    Are you running any os tweaks at all? Might be possible to shave another second or so off that time...
     
    Highland3r, 10 Mar 2005
    #1221
  2. Mister_Tad

    Mister_Tad Will work for nuts Super Moderator

    Joined:
    27 Dec 2002
    Posts:
    14,085
    Likes Received:
    2,451
    very nice time :thumb:

    finally for some *real* competition ;)

    im quite confident on shaving off another second to get 29 but 28 may be stretching it, let alone 27 :blush:

    what sort of home-made cooling are you running?
     
    Mister_Tad, 10 Mar 2005
    #1222
  3. overcrash

    overcrash What's a Dremel?

    Joined:
    9 Mar 2005
    Posts:
    2
    Likes Received:
    0
    not any tweak just kill process unusual :D i can do 27s but with a few optimization :thumb:


    this but when i've do superPI the WC was stay inside ,i'll retry with the WC outside in 2 weet (i havent time for the moment) then i'll optimize more to do 27s with superPI not pached :D

    [​IMG]


    same disposition with my old DFI NF3 :D but now with my NF4 ;)

    i can do better with my WC outside in 2 week :D


    have you an CPUMark database :confused:

    for this :D CPUMark 362 2990Mhz
     
    overcrash, 10 Mar 2005
    #1223
  4. TMM

    TMM Modder

    Joined:
    12 Jan 2004
    Posts:
    3,227
    Likes Received:
    2
    yeh baby 1.72v :p (man this thing needs alot of voltage :/ )
    [​IMG]
    [sse2]
    mem @ cpu/12, 2.5-3-3-6-9-11 (no idea but setting the tras lower then cas+ras to cas + 2 seems to boost performance :eyebrow:
     
    TMM, 10 Mar 2005
    #1224
  5. tiido

    tiido What's a Dremel?

    Joined:
    10 Mar 2005
    Posts:
    1
    Likes Received:
    0
    tiido, 10 Mar 2005
    #1225
  6. Razor_cut

    Razor_cut What's a Dremel?

    Joined:
    12 Mar 2004
    Posts:
    205
    Likes Received:
    0
    29sec :thumb:

    3200+ 0.09
    MSI NEO2
    OCZ 3200 Rev.2 (1Gb)

    But will try 27 when my LS rigg gets ut going. The result above is cooled with -6C air and SLK948U+Delta 8cm.
     
    Razor_cut, 10 Mar 2005
    #1226
  7. Mister_Tad

    Mister_Tad Will work for nuts Super Moderator

    Joined:
    27 Dec 2002
    Posts:
    14,085
    Likes Received:
    2,451
    Can everybody please use the superpi that gives the times to 3 decimal places to participate
     
    Mister_Tad, 10 Mar 2005
    #1227
  8. Highland3r

    Highland3r Minimodder

    Joined:
    25 Jul 2003
    Posts:
    7,559
    Likes Received:
    16
    here

    Incase you need it.. It should be kept up to date as new versions are released
     
    Highland3r, 11 Mar 2005
    #1228
  9. Mister_Tad

    Mister_Tad Will work for nuts Super Moderator

    Joined:
    27 Dec 2002
    Posts:
    14,085
    Likes Received:
    2,451
    also updated the first post in the thread to include the same link :thumb:
     
    Mister_Tad, 11 Mar 2005
    #1229
  10. fathazza

    fathazza Freed on Probation

    Joined:
    20 May 2002
    Posts:
    3,256
    Likes Received:
    16
    [​IMG]

    least it got under 40 ;) having issues with getting my ram to evern function at its rated speeds in this board
     
    fathazza, 14 Mar 2005
    #1230
  11. JuMpErFLY

    JuMpErFLY Minimodder

    Joined:
    13 Mar 2003
    Posts:
    882
    Likes Received:
    1
    JuMpErFLY, 14 Mar 2005
    #1231
  12. RotoSequence

    RotoSequence Lazy Lurker

    Joined:
    6 Jan 2004
    Posts:
    4,588
    Likes Received:
    7
    This is just a tidbit for those of you with Nforce 4 boards; they seem to like the timings of 2,2,2,7 best for optimal performance. I dont have a board to try this on, but give it a go if you're so inclined :thumb:
     
    RotoSequence, 14 Mar 2005
    #1232
  13. tank_rider

    tank_rider What's a Dremel?

    Joined:
    3 Feb 2005
    Posts:
    1,090
    Likes Received:
    6
    [​IMG]

    my latest attempt with my new NF7-s mobo and OCZ Prmier RAM running 1:1, 2.5-3-3-7 timings, the new mobo has allowed me to get a respectable 400MHz overclock using air cooling.

    Pretty pleased with the improvement of nion 9 secs over my previous setup.

    I had the time down to 45 secs, but didnt get a screenshot of it, that was with the processor at 2400MHz and the RAM timings relaxed.
     
    tank_rider, 17 Mar 2005
    #1233
  14. jsheff

    jsheff What's a Dremel?

    Joined:
    24 Jul 2004
    Posts:
    209
    Likes Received:
    11
    Okay, so I'm a long tme reader, first time writer. Well, second but that was a while ago. Here's my result from my Toshiba Portege m200 Tablet PC with a Pentium M 745 (Dothan @ 1.8Ghz) at a shade under 2.4Ghz: 35.648secs.

    [​IMG]

    The desktop res is a tad high being the tablet's native res.

    I like that score :)

    The tablet uses an Intel i855PM, 512MB of Samsung DDR1 memory at 220Mhz, Windows XP Tablet PC Edition 2005 OS, Memory divider of 3:5 and all using STOCK cooling. Yeah - that's right, stock air cooler inside the laptop with no open case (Hell will freeze over before I dare to take my tablet apart!). Room temp is about 20C
     
    Last edited: 17 Mar 2005
    jsheff, 17 Mar 2005
    #1234
  15. Tolsk

    Tolsk What's a Dremel?

    Joined:
    14 Jul 2004
    Posts:
    773
    Likes Received:
    0
    well upgraded my score. but still cant break the 40 second mark.

    [​IMG]
     
    Tolsk, 18 Mar 2005
    #1235
  16. huren

    huren What's a Dremel?

    Joined:
    14 Aug 2004
    Posts:
    407
    Likes Received:
    1
    update the board :<
     
    huren, 24 Mar 2005
    #1236
  17. Mister_Tad

    Mister_Tad Will work for nuts Super Moderator

    Joined:
    27 Dec 2002
    Posts:
    14,085
    Likes Received:
    2,451
    do you not read threads?
     
    Mister_Tad, 24 Mar 2005
    #1237
  18. tank_rider

    tank_rider What's a Dremel?

    Joined:
    3 Feb 2005
    Posts:
    1,090
    Likes Received:
    6
    Just been doing a bit more fine tuning, got the ol CPU up to 2400MHz running stable and true.

    [​IMG]

    11 secs improvement on standard, and 500MHz overclock
     
    Last edited: 5 Apr 2005
    tank_rider, 24 Mar 2005
    #1238
  19. huren

    huren What's a Dremel?

    Joined:
    14 Aug 2004
    Posts:
    407
    Likes Received:
    1
    yes i do but i really couldd not be bothered reading through the 20 odd pages after my post.

    but have done now and thanks ~
     
    huren, 25 Mar 2005
    #1239
  20. jaguarking11

    jaguarking11 Peterbilt-strong

    Joined:
    10 Dec 2003
    Posts:
    2,039
    Likes Received:
    0
    Sorry ofr the overly large pic but I run dual monitors sort of. The secon monitor is a ps1 lcd displaying samurise.

    Anyways on with my bench
    [​IMG]

    Yes im using the old version of super pI but thats the one I been using for a while now for my private benching. Tonite I scored the lowes bench in my system ever. The image shows 3cpu-z instances running and tells all about the ram cpu speed and timings.

    But just in case i will type out the specs. p4 3.0C@ 3.6ghz @ 1.66v im runing kingmax pc4000@ 240fsb @ 2.5-3-3-5-8. The mobo is a p4p800 deluxe.

    The mobo I have has a droop mod and im hoping to do a vdim mod witch will hopefully allow me to drop my cas letency. This speed is the maximum 24/7 speed I run my system stably at. I have benched super pi @ 3.75ghz but the time wasent so good because I had way too many things runnning in the background.

    That score was achived with 25processes runing and a 3 month old win xp install.
     
    jaguarking11, 28 Mar 2005
    #1240
Page 62 of 78

Share This Page