1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress P|NNED - K|NGP|N´s Empire

Discussion in 'Project Logs' started by CustomRigs, 18 Aug 2019.

  1. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
    Project "P|NNED" K|NGP|N´s Empire !

    [​IMG]

    This is a new project where i manufacture my first casecon ! Thanks Rainerthat you trust in me again [​IMG];) I build this beast for him.

    First thing ... the projectname is "P|NNED" ... as you can read from the letters it has someting to do with K|NGP|N.

    It is a openframe case and you can use it like a benchtable
    That casing can hold four 480mm radiators ! You may ask yourself "why you need four 480mm rads ?"

    Some Hardwarespecs for you [​IMG];)

    Hardware

    CPU: INTEL I9 9980XE 18cores 36threads
    MB: EVGA X299 Dark
    GPU: EVGA RTX 2080 Ti K|NGP|N with the Hydrocopper waterblock
    RAM: 64GB HyperX Predator QuadKit 3200MHz CL16 (noRGB)
    SSD: TBA
    HDD: TBA
    PSU: Seasonic Prime 1300 Platinum
    Cables: Cablemod full sleeved set

    Watercoolingparts

    CPU Block: Watercool Heatkiller IV
    GPU Block: EVGA Hydrocopper
    Radiators: 2x 480mm Hwlabs Nemesis GTS and 2x 480mm Nemesis Hwlabs GTX
    Res: 2x Heatkiller Tube 150 D5
    Pump: 2x Aquacomputer D5 Next parallelmode
    Tube: Mix from HT and EK ZMT with some quickies

    The design of this casecon should mind to the EVGA gpu cooler design from the K|NGP|N and FTW3 models.

    All parts are made from aluminium sheet in 2 and 3mm and getting powder coated in matt black.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
    some of the hardware arrived :)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  3. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
    some more pics :)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  4. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
  5. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
  6. Yury

    Yury Member

    Joined:
    7 Mar 2019
    Posts:
    55
    Likes Received:
    11
    Beautiful hardware, following
     
  7. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
    i leave this here ;) now i have to do some work on the mesh and hardware and watercooling parts.
    Also the screws getting exchanged tomorrow with nice black ones :)



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  8. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
    P|NNED Update ... Radiators and fans are mounted :) also you can see my own designed cpu cooler top with a Heatkiller bottomplate inside. On the backside the four 480mm radiators and the nice Prime 1300W Platinum PSU are mounted :)

    The silver screws getting exchenage against nice black lens head screws ;)

    Also the mesh looking really good ! The K|NGP|N 2080 Ti Hydrocopper gets mounted vertical. I have to drill some holes for the vertical holder tomorrow. After that i can measure the length of the cables.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Cheapskate likes this.
  9. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
    update :)

    GPU its on its place ! First tubes are in

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Cheapskate likes this.
  10. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    87
    Likes Received:
    20
    today i put the cables in and mounted the hdd and ssd´s :) .. time to fill the loop :D

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

Share This Page