1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Storage P6X58D-E Marvell Sata 6G Driver

Discussion in 'Hardware' started by Bugste81, 22 May 2011.

  1. Bugste81

    Bugste81 Stephen

    16 Mar 2010
    Likes Received:
    High I was wondering if anyone had experiance with a P6X58D-E motherboard and what drivers they use. I'm using a Samsung 1tb F3. I've just changed over to AHCI settings and performance seems a bit eratic. I've tried the latest drivers from ASUS's official site and from http://www.station-drivers.com/page/marvell.htm Any help would be appriciated.

    Ok just updated to the drivers shown on this page:

    http://www.station-drivers.com/page/asus/asus p6x58d-e.htm

    How do you updated the bios of the Mavell Chip? I don't have a floppy drive.
    Last edited: 22 May 2011
  2. Guest-16

    Guest-16 Guest

    The BIOS gets updated with the motherboard firmware.
  3. PhoenixTank

    PhoenixTank From The Ashes

    5 May 2010
    Likes Received:
    Pro tip: Marvell's 6G/SATA III drivers are junk. You are better off using the standard msahci drivers.

    That said, why are you using the SATA III ports with a Samsung F3? You will get better performance from the standard Intel ICH10 SATA II ports for HDDs.

Share This Page