1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Parvum-Systems R1.0 ATX AORUS build Worklog

Discussion in 'Project Logs' started by CustomRigs, 28 Jun 2018.

  1. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Worklog to my actually Build "Parvum-Systems R1.0 ATX AORUS"

    Thanks to all my supporters that they trust in me and help alot to made this build become real
    :)

    AORUS WATERCOOL TEAM-GROUP INTER-TECH Arcturos-Solutions
    PARVUM SYSTEMS
    NOISEBLOCKER



    Parvum Systems R1.0 ATX AORUS Themed Green and Orange


    Hardwarespecs:

    AMD RYZEN 2600X with Heatkiller IV CPU Kühler
    AORUS X470 Gaming 7 Wifi
    16GB quad Kit Team-Group T-FORCE DELTA RGB 4x4GB 3000MHz
    2x GTX 1080 Founders SLI with Heatkiller IV GPU Block
    1x 256GB SAMSUNG M.2 NVME SSD
    2x 256GB Crucial MX 100 SSD (altbestand)
    Inter-Tech SAMA FORZA 1200W PSU
    2x Heatkillertube with DDC Pumps
    2x 360mm Magicool Rads
    11x Noiseblocker BL12-PS ELOOP Black
    BARROW 16mm Chrom Hardtube fittings

    Planed: Distributionplate laying on the midplate, Acrylic Terminals for the Heatkiller GPU blocks, Custom SLI Bridge with RGB lightning, full sleeved psu cables


    One Draft and some pictures from the case

    [​IMG]

    Renderings from Parvum


    [​IMG]

    [​IMG]

    [​IMG]

    Finished Case

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Fitting with hardware for measurements

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

     
    _Prometheus_ likes this.
  2. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Well :) i designed an acrylterminal for the heatkillerblocks. The 3d modells actually given to my cnc milling guy and not that easy to mill because it is a four side processing.

    connector0.png connector1.png connector2.png
     
    _Prometheus_ likes this.
  3. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Here is my finished distributionplate, also with polished aluminium cover to match to the heatkiller gpu blocks :D

    Distriplate_FINAL_FINAL_1.jpg Distriplate_FINAL_FINAL_2.jpg Distriplate_FINAL_FINAL_3.jpg Distriplate_FINAL_FINAL_4.jpg Distriplate_FINAL_FINAL_v1_2018-Jun-29_06-05-59AM-000_CustomizedView13667147240_jpg.jpg
     
    _Prometheus_ likes this.
  4. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Exchanged the struts on the HK tubes and added lightning. also does the 3d modell for sli bridge cover [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    _Prometheus_ likes this.
  5. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    okay [​IMG] all parts have lighting but the heatkiller IV not !

    designed a lightingmodule today by my self [​IMG] first prototype gets 3d printed. final module gets cnc milled from aluminium. build the HK IV in fusion 360 today [​IMG] was fun and the first more complex 3d modell for me

    0.jpg 1.jpg 2.jpg 3.jpg 4.jpg 5.jpg 6.jpg
     
  6. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
  7. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    How a Heatkiller IV CPU cooler looks with lighting ? soldered the leds today. The lightingmodul which covers the led strips gets printed tomorrow! You can see a render in the pictures. I did a last new rev. of the module. Screwless design. Easy to mount.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  8. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Im waiting for the cnc parts and used the time:) to create the whole build as a 3D model :D it is not that detailed but you can imagine how it looks when the build is finished. These are the last rendered pictures ... next log comes with real pics ;)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  9. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    first rev of my lightingmodul for the Heatkiller IV CPU Cooler is done [​IMG]have to do some changes on the next rev and also try to integrate a plug in the module [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  10. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Ive done some prework on the basement and had to spin one rad around. Because off using two diffrent loops it was necessary ... theres not much space but i put the two drain ports in. Using 16mm softtubes for the basement. I think if i use 360 slim rads it would be much easier but i dont have 360 slim rads xD ... when the distriplate arrives i just had to connect the fittings and shorten the tubes :)


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  11. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    the distriplate also arrived but i ahve to do the treading the next days :)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  12. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    some more pictures :D


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Goatee likes this.
  13. RooiDuiwel

    RooiDuiwel Member

    Joined:
    20 Sep 2009
    Posts:
    52
    Likes Received:
    4
    those are some damn fine custom parts

    keep it up

    looking forward to what will be made next
     
    CustomRigs likes this.
  14. HackJoe

    HackJoe Active Member

    Joined:
    29 Jun 2011
    Posts:
    745
    Likes Received:
    34
    Nooooooooooo! It ended, I started the thread thinking... urghhh, the scene has become so dull, why does none of this excite me anymore... *all the while scrolling down* then I picked up on the effort you're putting into this, the 3D work and fresh loop design.. the LEDs you'd added to res(s), the cpu! wicked! I'm in! Top work buddy! I'm not a huge fan of the colors you picked for the R1.0 and I'm absolutely over the RGB fad but I do think this is gonna be special. I've always got a soft spot for a Parvum build. Please do an awesome job with your cables! :)

    Subbed

    J.
     
    CustomRigs likes this.
  15. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    thanks alot :) the build didnt get RGB lighting ... but it can :D Im using just white lighting ;)
     
  16. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Did some testing to the lighting of the watercooling components :) Mainboard is not connected because the psu gets full sleeves at this moment ;) distriplate is not on the pictures :D but it will also have a lighting module.

    On this pictures here you also can see my final Heatkiller IV cpu cooler lighting module :)

    My custom acryl terminals on the Heatkiller GPU blocks look awesome !

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    kim, HackJoe and jenners like this.
  17. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
  18. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Today i did the leakcheck to the distriplate :) all is fine :D

    The distriplate is also on its place and i can begin with the tubing :)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    _Prometheus_ likes this.
  19. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    Tubing is in place :) waiting for the PSU

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  20. CustomRigs

    CustomRigs CallMeCleaner

    Joined:
    8 Dec 2017
    Posts:
    38
    Likes Received:
    12
    mounted the sli bridge cover today :)

    [​IMG]

    [​IMG]

    [​IMG]
     

Share This Page