Discussion in 'Project Logs' started by 4LIEN, 10 May 2020.
It came out beautiful. I'm only disappointed that it doesn't hover.
Thanks! I try always the get the perfection in all details, it's hard, but at the end the result really paid off!
Ahahahaah thanks! next time i will add a plasma propulsion engine!
So guys little update after one week of test and use on my new ALIENBASE! It's all working very well and FAST, also silent, i'm really happy!
Firts thing i've updated also the firts post of this thread with all the final specs, and reporting them also here!
Final HW configuration
CPU: Intel i5 10600K @ 4.8 GHz
MOBO: Gigabyte Z490 Vision D
VGA: Gigabyte GTX 1080 G1 Gaming OC @ 2000 MHz
RAM: 2x8GB DDR4 Kingston Predator RGB @ 4000 MHz
PSU: 800W 80+ Tagan BZ PipeRock
Storage: 500GB Sabrent Rocket NVMe (OS)+ 1TB Crucial P1 NVMe (Games)+ 1TB Hitachi 2.5" 7200rpm sata3 (data)
Cooling: Barrow + Bykski + XSPC + custom liquid loop (below detailed setup)
Detailed liquid cooling setup:
3 total radiator:
- XSPC 240 low profile 20 mm
- XSPC 120 low profile 20 mm
- Bykski 240 standard 30 mm
Tubing: hard PETG 16/12 mm
Waterpump: Barrow CH 18W PWM
CPU Waterblock: Barrow
GPU Waterblock: Bykski
Reservoir: Bykski 260 mm Virus style modded
Fittings: Bykski + Barrow CH
Accessories: Barrow filter + Barrow green valve
Coolant: EK Cryofuel acid green
Fans: Alseye X12 (3 fans) + Noctua NF-P12 redux-1700 + Scythe Kaze Flex slim PWM
Temperature test (with CoreTemp):
Ambient = 19 C
IDLE (with all fans and pump running very slow)
CPU = ~ 22 C
GPU = ~ 25 C
FULL LOAD (with prime95 and Unigine video test, fans and pump about 40/60%
CPU = ~ 68 C
GPU = ~ 45 C
Also i want to thanks again my only one sponsor for the beautiful cables!
>>>> HardWire - Custom cables maker <<<<
Finally, i'm also landed on BUILDS.GG, so if anyone reading have an account here and liked my work, please follow! Thanks!
I noticed that i forgot to take some pictures of the automatic lights on the front usb ports, very useful in the dark!
This is my little gaming station! Little space but with all i need!
I've installed in these days 3D panels on the wall with RGB LED! I love the effects of these panels! I'm also working to do a cleaner cable management on the back.
You can see also my Logitech G25 modded with real drift car steering wheel! And i have maked also the handbrake, but need to modify it before install, because with the ALIENBASE, i have less space on the table.
Bonus picture for the lover of retrowave!
Looks really cool :O Good job
Separate names with a comma.