1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress project [Black Label Society]

Discussion in 'Project Logs' started by do}{tor, 29 Jan 2014.

  1. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    [​IMG]
    Everyone stopped by Good day ! It's time for a new project . I do not know about you, but I have been waiting for this for a long time . Since that time, I went through a huge number of concepts are almost was ready to custom , but apparently not this time !
    And now a few words about the inspiration . Everyone has a vent , in some it is a sport , other games or chatting with friends , the third family. In my case, everything is mixed , but has always remained a constant feature of music ... good , heavy music . I remember in my 5 years old fell asleep in his father's headphones and guitar riffs Metallica and Megadeth emanating from them.
    With a group of Black Label Society I met recently , a couple of years ago and began my acquaintance with songs RUST words and the meaning of which , as it is particularly deeply entrenched in my head . And then one evening , crushing paper with another sketch , of the columns began to play the song. Believe it or not , but that's when I clearly understood that it would be ...
    Will be plenty of leather and chrome , chains, spikes and guitars.



    [​IMG]

    Configuration:

    Case: Cooler Master HAF Xb
    CPU: Intel i7 xxxx
    Motherboard: ASUS Rampage iV Extreme Black Edition
    DDR: Corsair Dominator Platinum
    GPU: ASUS GTX 780 POSEIDON SLI


    Cooling:

    Radiator: Watercool MO-RA3 LT
    Fan: Scythe Gentle Typhoon
    Reservoir: Alphacool Cape Corp Bullseye Reservoir
    Pump: Aquacomputer D5 Pump Motor with USB and Aquabus Interface
    CPU Waterblock: EK-Supremacy Clean CSQ
    GPU Waterbclock: EK-FC780 GTX DCII + Backplate (Black)
    Fitting: C.Matic
    Tubbing: Chrome Copper Pipe
    Control: Aquaero 5 PRO +


    [​IMG]
     
    Last edited: 30 Jan 2014
  2. jrs77

    jrs77 Well-Known Member

    Joined:
    17 Feb 2006
    Posts:
    3,487
    Likes Received:
    103
    Let me edit your youtube-link ;)

     
    do}{tor likes this.
  3. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    jrs77
    thx dude, apparently I'm doing something wrong :rolleyes:

    And now I want to introduce you to the foundation of this project, Meet Cooler Master HAF Xb:

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    And of course where I no chief assistant:

    [​IMG]
    :clap:
     
    Last edited: 30 Jan 2014
  4. jrs77

    jrs77 Well-Known Member

    Joined:
    17 Feb 2006
    Posts:
    3,487
    Likes Received:
    103
    Your pictures aren't showing, as they need to end with .jpg/.gif/.png or any image-format. You've tried to link attachements from another foorum there and this won't work I'm afraid. You need the direct-link to the images.

    And for the youtube-videos linking here... you only need to put this part "zisGmnUGq7Y&hl" into these tags
     
  5. The_Crapman

    The_Crapman Don't phone it's just for fun.

    Joined:
    5 Dec 2011
    Posts:
    4,980
    Likes Received:
    1,520
    To see, to bleed, cannot be taught. In turn, your making us........... MODDING HOSTIIILE!
     
    do}{tor likes this.
  6. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    jrs77
    And thx again! All corrected.
    The_Crapman
    :rock: :clap:

    Today unpack the parcel:clap:
    Each parcel is checked and pass quality control package :hehe:
    [​IMG]
    Main gently open :worried:
    [​IMG][​IMG]
    [​IMG]
    Meet:clap:
    Cougar CX 1050

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
    EK-Supremacy Clean CSQ
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  7. GotMod?

    GotMod? New Member

    Joined:
    3 Apr 2012
    Posts:
    47
    Likes Received:
    4
    Doc, is that you?? )))))
    Glad to see your project here!
    I know you got more to show us - waiting for update.
     
    do}{tor likes this.
  8. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    And once again the time of parcels :clap:

    Lutro0 customs:

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    And Watercool MO-RA 3:

    [​IMG][​IMG][​IMG][​IMG][​IMG]

    to be continued...
     
    Last edited: 31 Jan 2014
  9. jrs77

    jrs77 Well-Known Member

    Joined:
    17 Feb 2006
    Posts:
    3,487
    Likes Received:
    103
    Love these big MO-RAs, but I never had hardware in need of such a massive radiator. Was long ago thinking of using one as a replacement for a sidepanel :p
     
  10. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    GotMod?
    My friend and I glad to see you! It's really me :clap:

    jrs77
    Prior to this project about MO-RA heard a lot of accolades, but did not dare to try it myself. This proctitis check whether it can cool down the mega powerful components from ASUS :D

    And another guest! :clap:
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    :thumb:
     
  11. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    Hello again! Some more accessories:
    [​IMG][​IMG][​IMG][​IMG]
    army order :D
    [​IMG][​IMG]
    Started sleeving PSU :clap:
    [​IMG][​IMG][​IMG]
    Due to the fact that the power supply is not modular, CPU power cord looks like 8 +4 +4 +4, with the result that does not look very nice. It was decided raobrat additional power connector and 4 pin solder wire in the circuit itself closer to the power supply:
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
    But then new problems. Firstly supply segments refused to close, in the second factory size hole wire was not enough ... but first things first.
    Expanding the hole:
    [​IMG][​IMG][​IMG]
    Due to the fact that even with the slim version of the power supply fan is not closed, it was decided to put it out. It was promoted by a small pedestal on attached power supply in the case:
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
    Try on cooler:
    [​IMG][​IMG]
    :dremel:
     
  12. montymole

    montymole Rigid Tubist

    Joined:
    24 May 2010
    Posts:
    353
    Likes Received:
    3
    Totally Bad Ass
     
  13. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    project [Black Label Society

    So more to the point, or rather to the body, but rather to the skin! To those who think that weave skin - it's easy to say that you are wrong (for the photo does not scold).
    Patterns are ready:

    [​IMG][​IMG]

    try on:

    [​IMG][​IMG][​IMG]

    So pocket, which he, you ask ... I originally hoetl achieve similarity in biker black leather jackets, for this reason, has decided to close all of the devices and hard drives on the front studded pocket:naughty:

    [​IMG][​IMG]

    Preliminary results, the final picture will be stitched later.

    [​IMG][​IMG]
     
  14. AlienwareAndy

    AlienwareAndy New Member

    Joined:
    7 Dec 2009
    Posts:
    3,421
    Likes Received:
    70
    I can't say I'm a huge fan of leather in computer builds. I do like the ideas you have though, and that guy looks like Rob Zombie so it's all good.

    I love those Cougar power supplies. I used to have one (800w) and it was gorgeous. Nice to see what you've done with the braiding too as I face the same sort of problems with my build as in it's non modular. I'm just going to remove anything I don't need (all of the SATA power plugs for example) which should leave room for the braid.

    Will be watching this one :)
     
  15. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    Compare these musicians are not quite right, but thanks for the opinion and interest:clap:
    It's time the front panel :dremel:

    Billets:

    [​IMG]

    Putting the puzzle:

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Removed the protective film and secured the upper plating layer:

    [​IMG][​IMG]

    Result:

    [​IMG][​IMG][​IMG]

    Making lightbar:

    [​IMG][​IMG][​IMG]

    Apply the markup, check:

    [​IMG][​IMG]

    Cushioning panel skin and prepare for surgery:

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Begin surgery:

    [​IMG][​IMG][​IMG][​IMG][​IMG]

    Begin transplantation:

    [​IMG]

    it's a live, a LIVE!!!!:D

    [​IMG][​IMG][​IMG][​IMG][​IMG]
     
  16. mansueto

    mansueto Too broke to mod

    Joined:
    31 Aug 2007
    Posts:
    3,784
    Likes Received:
    108
    That is crazy! Awesome job.
     
  17. Reiep

    Reiep Member

    Joined:
    21 Jun 2010
    Posts:
    35
    Likes Received:
    2
    Great band, and greater mod !
     
  18. Cheapskate

    Cheapskate Insane? or just stupid?

    Joined:
    13 May 2007
    Posts:
    10,913
    Likes Received:
    966
    Looks awesome.:D
     
  19. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    Friends, I welcome all!
    Excuse for long absence, life always introduces amendments in our plans so it is necessary to place priorities. But now work began to boil again and I promise, it will be interesting!

    We meet the beauty of Rampage BE:
    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
    And monster of GTX 780 Poseidon Platinum:
    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
    Weathers I was given excellent, and hands as it appeared, still remember as to hold the camera. In the course of photography I wasn't abandoned by feeling of that I am watched... and I wasn't mistaken...
    [​IMG]

    I promise to upload today some more interesting pictures and to tell about further steps! :D
     
  20. do}{tor

    do}{tor New Member

    Joined:
    21 Dec 2012
    Posts:
    34
    Likes Received:
    1
    Evening is taken with panel production for tanks, I will fit further all this business by skin:
    [​IMG][​IMG][​IMG]
    Also there arrived some missing parts, but about it a bit later, suggest to dream up:
    [​IMG][​IMG][​IMG]
     

Share This Page