Project: Blackhaze

well i starded with one of these:




and yes its quite boring...he has no idea i'am about to pimp this case(srry looking to much pimp my ride )

this is the *junk* that goes in the case :

Case: Midi Tower 2059 ATX PIV 300W
PowerSupply: Q-Tec 450 watt ATX voeding dual fan
CPU: AMD Athlon(TM) XP 2600+
Motherboard: Asus MB A7N8X-X AMD Athlon
Memory: DDRAM 512Mb PC3200 400MHz
Graphics: GeForce FX 5200 128mb
HDD: maxtor 40Gb 7200rpm and maxtor 120gb 7200rpm
Heatsink: Spire AMD socket A CPU cooler

and some other stuff like a sharkoon controler,4 neon tubes(green) and some extra fans.


Here is my motherboard and stuff working on my desk(hey i got to log right ):




and another big pile of messy stuff that have to fit in:



ok lets start with my fresh green painted frame:



this will be my side panel(1st pic nearly done 2nd pic all done):



the fan in the side panel looks like this(only my has a strobe effect):



here is the lower part of my front pannel with windtunnel and mash:



instald the fan for the fronttunnel:



it comes quite together now :



almost every thing instald:



my fronttunnel in the dark(little hard to see but in real it looks better):



and my sidepanel in the dark:





so let me know what you guys think of it,any hinds/tips/comments are welcome.

ps.dont look at my English couze its my second Languish

 

and i am planning to tiddy the cables up,this are the things on order for it;

Sunbeam RCFG-UV Fan guard with UV ccfl:



ACRyan ACR-FK3824 FlexSleeve Kit UV green:



ACRyan ACR-CB7570 Connectx Floppy Power 4pin Female UV glow:



ACRyan ACR-CB8553 Connectx 4P Molex Male connector huls UV green:



ACRyan ACR-CB7808 Connectx 4P Molex Female connector huls UV green:

 

Good work (and paint), but maybe too many colors for BLACKhaze... hehehehe

it`s my opinion, but don`t mix pure blue light with green light if each color not cover 50% of the available lighting (degradations with CCFLs, for example). otherwise don`t match very well, i think.

 

wel normally the ccfls are not on @full but quite weak fanting in and out,but thats a little hard to take a pic of

 

Thats a sexy green for the frame. I like it.

I was going to scream about the rats nest of wires, but you said you are working on that, so I'll let it slide. This time.

As a side note, it appears you are hotlinking the picture of the blue fan. You might want to do something about that. EDIT: and all of the other component pictures. You can use them, just host them yourself.

 

uh man, u realise that fan on the side of your case will get hardly any airflow. maybe open it up a little more, part from that looks good, once the wires are tidy should look nice

 

srry dont know that,i fix it as soon asposible

 

thx but i like to invite you here and put your hand in front of it,and tell me it does not got a good airflow(and yes its not max,but hey the eye wants something to )

 

added a new fan for the front intake, looks much better now(i think):

before:



after:

 

the fangrill and cablesleeve instald:







the rest of the cables and molexconectors wil be done soon

 

You still have quite some nasty cable mess going there.

Sleeving the cables won't tidy it up on it's own. Your current positioning of the cables is still highly airflow restrictive.

 

congratz! you sleeved your own cables and thats a pain, cause its sooo easy to screw up. i think you've done a good job, now the challenge is to keep them organized, but show cause they look good, good job and keep it up!

 

what would you recoment me to do couze i'am quite a noob in this

 

cable ties!