1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Project: c-black (Migui 2)

Discussion in 'Project Logs' started by MIGUI, 15 Apr 2009.

  1. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hello everybody.
    I'm new here and here another of my projects, this is a case Armorsuit Lian-li PC-P80 with water cooling and some pneumatic.
    The case has four moving parts.

    Sponsored by:

    [​IMG]

    [​IMG]


    SketchUp idea.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Here some of the components.
    The Case.
    [​IMG]

    The compressor to 12VDC. Work up to a maximum pressure of 8 bar, to be quite small, is 11.5 cm wide, 13.7 cm high and 18.5 cm long
    [​IMG]
     
    Last edited: 14 Jun 2009
  2. WolfandAngel

    WolfandAngel Got fins?

    Joined:
    2 Dec 2008
    Posts:
    250
    Likes Received:
    7
    this is going to become very interesting mod if i understand correctly you want to make something like a water cooled pc with air pressure:confused:
    and how loud is the compressor ?
     
  3. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hello.

    No, take moving parts. The front, right side and upper part.
     
  4. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hi, bought this switch and black with a red light 22mm diameter Cambiare what brings on the factory box, only instead of turning on the pc.

    [​IMG]


    I had to put the silicone thermal switch, as the hole to work the box is just 22mm in diameter equal to outer diameter of the switch, so it could not hold the nut that comes with, thank goodness it was not bigger.

    [​IMG]

    [​IMG]
     
    Last edited: 25 May 2009
  5. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hello.
    I modified the rack of hdd Lian-li.
    1. I changed the fan 8cm by 7cm two.
    2. I have put a black plexi front.

    Idea.
    [​IMG]

    This is the rack.
    [​IMG]

    These are the fans 7cm.
    [​IMG]


    Now the job.
    [​IMG]


    [​IMG]


    [​IMG]

    [​IMG]

    Now the front.
    [​IMG]

    [​IMG]

    The final result.
    [​IMG]

    [​IMG]

    Regards.
     
    Last edited: 21 May 2009
  6. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    I have prepared the piece of pneumatic control. This anger lareral left in the case.

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]

    This is the gauge pressure used to.
    [​IMG]

    This is the flow regulators, i used six. Regular stops will be the speed of movement (fast or slow).
    [​IMG]

    A view of how it will be the pneumatic control.
    [​IMG]


    [​IMG]
     
    Last edited: 6 Aug 2009
  7. La carotte d l'o

    La carotte d l'o New Member

    Joined:
    27 Nov 2007
    Posts:
    385
    Likes Received:
    23
    Looks interesting. I will follow this.:thumb:
     
  8. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hello.
    Today, I finished painting the chassis, the color is matte black.
    This is the result.
    Has four layers of paint.
    [​IMG]


    [​IMG]


    [​IMG]
     
    Last edited: 19 May 2009
  9. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hello.
    I put the compressor, the pressure switch, the valves 5/2 way and the power supply for compressor and the valves.

    The compressor.
    [​IMG]

    [​IMG]

    Now the assembly.
    [​IMG]

    This is the pressure switch.
    [​IMG]

    The assembly.
    [​IMG]

    These are the valves 5/2 way to 12v, uses four.
    [​IMG]

    Now the assembly.
    The first valve.
    [​IMG]

    The second valve.
    [​IMG]

    The thrid valve.
    [​IMG]

    The fourth valve.
    [​IMG]

    View all valves.
    [​IMG]

    This is the power supply for compressor and valves.
    [​IMG]

    It's fitted with the same screw valves.
    [​IMG]
     
    Last edited: 6 Aug 2009
  10. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    This is looking very interesting, I will be keeping an eye on this.
     
  11. perplekks45

    perplekks45 LIKE AN ANIMAL!

    Joined:
    9 May 2004
    Posts:
    6,627
    Likes Received:
    856
    +1
     
  12. .Fatality.

    .Fatality. New Member

    Joined:
    10 Jul 2008
    Posts:
    146
    Likes Received:
    0
    +2 :D
     
  13. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hello.
    Well, now mounting the drain valve, sisx regulators and pressure gauge.

    The drain valve. This serves to empty the pneumatic circuit.
    [​IMG]

    [​IMG]

    Th assembly of the flow regulators.
    [​IMG]

    With pressure gauge. This makes the pressure from 0 to 1megapascals (0 to 10bares).
    [​IMG]

    [​IMG]
     
    Last edited: 19 May 2009
  14. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    As I said before, looks very interesting. You obviously have a very good grasp on pneumatics cos I have no idea of what's going on lol.
     
  15. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hello.
    Well, the case will have four moving parts.
    1. The support of the motherboard in dereho side.
    2. The top cover.
    3. Front door.
    4. The front of the case to rise 5cm.
     
  16. rakesh_sharma23

    rakesh_sharma23 Member

    Joined:
    2 Sep 2007
    Posts:
    180
    Likes Received:
    15
    Hell i just cant understand compressure , valus.........?????? what's going on.....But seems like hell icefactory inside the cabinet........Intresting
     
  17. stonedsurd

    stonedsurd Is a cackling Yuletide Belgian

    Joined:
    11 Mar 2009
    Posts:
    7,752
    Likes Received:
    291
    Ooooh, this looks mighty interesting.
    Subbed to keep a watch on :)
     
  18. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
  19. MIGUI

    MIGUI New Member

    Joined:
    27 Feb 2009
    Posts:
    188
    Likes Received:
    17
    Hi.
    Well, I mounted the exhaust valve.

    This is the exhaust valve, used to prevent overpressure.
    [​IMG]

    Now the assembly.
    [​IMG]

    [​IMG]

    [​IMG]
     
  20. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    Looking very good my friend.
     

Share This Page