First off, I'd like to state this is my first mod - so don't expect too much of me, but I have a friend who is an experienced modder who is "guiding me through" - so hopefully it won't end up too bad. Alright, now on to the project. It's called CGR Box. The mod is, for a large portion, based off/inspired by Bliss Unleashed here, which is, IMO, one of the best mods out there because it's really well done, yet simple (in appearance, not in the making) and elegant. First - the initial renders, made in Maya. So yeah, you can see how much it resembles Bliss Unleashed. Please note, however, that visually, it will end up not looking so similar because the inside is going to be lit by green CCs - I was just too lazy to mock that up in Maya. Like Bliss was, I wanted to keep it simple in appearance. And yes, that is a 120 mm on the side - it looks better aesthetically than an 80 (with this design), and with it I can keep the same amount of intake as exhaust. Here's a picture of with the front grill and the fan slots cut out. As you can see, the dremel slipped and caught off a piece of the front bezel. I thought it wouldn't look very good even if we painted it - so we got another front bezel and just cut it with a bandsaw (which made super clean cuts, and took about 30 seconds). You'll see that version in later posts. First thing, we start with the simple stuff - we stealthed the cd drive. We also painted the drive tray black after I took the pic. Here, you can see we painted the interior black, outlined the top window (well, we still have to round the edges on the outline), and cut the piece of acrylic to fit in the bezel. Also, feel free to offer any ideas on how to mount the front piece of acrylic without the mounting being visible (initially we were gonna use hot glue, but we think it would show up too much).