Discussion in 'Project Logs' started by KoSoVaR^, 23 Jun 2011.
Very good start on the sleeving, it looks great! I'm going to need to find paracord in the UK...
hehe i havnt started, im almost done with it only 17wires left
Very interesting sleeving there. Not seen anything like it before
Tes it is , its not that usual
Now i have finally sleeved the whole PSU ... Talk about good timing when we are heading back to Sweden tomorrow,I will really miss them here a lot, for the fun we had on this short time it is quite sick!
Time for some pictures then ... a picture is wort more then a 1000 words, shame I did not have access to the systemcamera, my brother was out for some photojobs... better pictures will come later when I made the hole bigger... so dont worry!
Awesome mix of colours- good job
if were to buy that psu of you how much would you sell that for
Thanks dude !
I can trade it for a milkchocolate bar company haha xD
Very nice work!
I love the sleeve color!
Good to hear that!
Today i'm going to celebrate because...I'ts my bithday!
I also have something epic to tell you!
Today i got two pacages...not from my parents, brothers och family & friends, but from my Sponsors Fractal Design & Bitspower.
The epicness was that they arrived at the sami time, what a wounderful timing!
I will post some pictures tomorow!
Happy bithday to me!
happy birthday good job on the sleeving
Thank you and thank you again !
thank you (=
I like the color plan!
Now it's time for a little update, I think, a bit late as usual but I have had much to do now when you come back from home ...
Can the course anyway to say I got a pretty nice birthday celebration, and two packages from my sponsors I have also had time to strip the chassis on all parts and test fitted the reservoir a little, I will very shortly start modding process so you can keep up now ! Also has some Sleeving come to be made
What I have planned to do:
-Make the hole bigger on the PSU plate to make room for all the sleeved cables
-Sleeve the rest of all cables which is left to be sleeved
-Build radiator plate/holder
-Milling out a PSU SFX Raiser
and mutch more
I thank my sponsors Fractal Design Ooh Bits Power to help me with their products and that they showed great interest in my project!
Now comes a picture bomb ... and yes do not have access to the camera system when my brother borrowed it from me, but the pictures are taken with a newer digital camera yet, pictures are not good :/... aja enough talk here, you pictures ... was so good and enjoy!
We start with the package from fractal ... I got a Fractal Design Array R2 as I waited for ages on! You see, it also is also itself a Fractal Design Define XL, this is when the chassis my twin brother has been sponsored by his new watercoolingbuild ...
6 Screws later...
Additional 4 screws ...
Tillbehörslådan med bra o ha saker...mestadels skruvar till hårddiskarna och lite distanser samt div. skruvar...
Now its almost all empty...
I wanted to check on with this button in case it can be modified or not, what I had in mind is to simply replace the blue LED with a white one . which in this case seems to be possible!, I have hopse for the best because otherwise it will be replaced by a new one, simple as that ...
Tests the reservoir a little ...it fits, but some changes must be made on the reservoir mount so it can be moved as far up as possible
Then it was time for the package Bits Power has sent to me, consisting:
1x GALAXY FREEZER DIMM2
1x Black Freezer VG NGTX470 POM Top With Matt Black Panel
1x DDC TOP POM Version
1x O-Ring Set II
2x G1 / 4 "Matte Black CaseTop Water-Fill SET
2x Matt Black Q-Block
12x G1 / 4 "Matte Black Stop Fitting
2x G1 / 4 "Matte Black Rotary G1 / 4" Extender
2x G1 / 4 "Matte Black Temperature Sensor Stop Fitting
1x Black Freezer MOS N78AP2 (Matt Black Version) (Model Name: BP-WBN78AP2-MBK)
4 x G1 / 4 "Matte Black Mini Dual G1 / 4" Extender (Model Name: BP-MBWP-C42)
I Will be porting this a little bit, to give it some higer flow Optimisation!
That's all for now ... I have had time to measure and test some of the reservoir will fit together with pump + top, etc., then I have found that my G1/4 "dual exteder Rotary fitting will not work properly and that I must have a pair of mini-extenders instead ... that just a few mm can do so much!
pictures on this comes tomorow !
Separate names with a comma.