Hi i'm planning to start my mod all over again. I'm going to do a lot of stuff so keep tunned The start First i have to break down the hole wc and hardware My first problem... Cpu was stuck on the wc blok, i tought i had broken all my pins but the cpu wasn't harmed in any way and works fine. I took out the hole wc in his part I took all hardware out and all mod stuff Then i went downstairs and took the hose. I sprayed and washed the hole case The result: one shiny case. In the meanwhile i putted my hardware in an other case Stay tuned i'm planning to make alot of new things
Hey AsEeL, that's one sweet case you got there. It's pretty darn big (or it just looks that way ). Anyway, are you going to be modding some new stuff on that case? What are your plans?
Well im planning to make a front mod I'm going to do a paintjob an improved wc Cleaner wirreing and stealhting it Next step is to take the mobo tray and all the racks from the case. Then you will see what i'm up to
Is that a Lian-Li PC7323A ? I've got that one too and modified it to fit my prom in. Only thing I hate about the case is when you open the door, the front is kinda ugly compared to the rest of the lian's. I'll be following this one . Good luck neighbour!
i will stay tuned, to see what you are going to do with it. the cpu problem is nothing harmless. I have the same problem in the store. The only thing that happend one's was that some of the pins didn't stand up well. see you keep up the good work. chrz
Update 1 Yesterday evening i cleaned my gpu wc block Did some work this noon. I started to drill out all the rivettes The result, one nice frame Before i started Lets penetrate this baby Top's off Clean isn't it Time to spray with some paint Stay tuned for more
Sry guys but i didn't had much time nor a digicam at my disposal. Hope this little update starts the fire of disire inside you guys again Here you see some parts I painted. Its only the first cote so the result wil become better after a while. In the end the whole case wil be black but not the panels on the site and top. This week i'll try to paint everything. As you can see i made some cut outs in the motherboard tray. This is for the stealthing of the cables. The vents below wil be used in the frontmod
That`s what i said. It looks like he used elmers glue to hold that block on his cpu. You only need a razor blade thin layer.
That's a whole lotta radiator! Looks nice though, keep it up. Definately an interesting setup, and I love lian li mods
