Hello guys! First some introduction. Well, my name is Thomas and I live in the Netherlands. I'm 18 years old and just finished my secondary school, next year i'm going to do the mechatronics education. In my vacation I work at a stairs factory (steel and wood), especially in the steel devision. Questions? Feel free to ask! Now the project! After a long time watching, reading, watching and reading. I decided to start my own project. This will be my first scratch build computer case, so I still have to learn. Sketch? Oh yes, I made a sketch! Here you go: First update: I ordered the aluminium, the following dimensions: Angle: 30x30x2mm (6m length) Angle: 25x25x2mm (6m length) Angle: 20x10x2mm (6m length) Angle: 20x20x2mm (6m length) Angle: 15x15x2mm (6m length) Plate: 2000x1000x1mm Plate: 2000x1000x2mm Also bought some gear: a rivet tool, file's and some drills.