Hi Everyone, Allow me to introduce myself.My name is Pascal and i am from the netherlands and i am a metalworker/welder for 22 years now.I am infected with the mod virus and after building 2 desks http://gathering.tweakers.net/forum/list_messages/1439066 its time for something else.This time its gonna be a tower and again build from scratch. The name of this project is Flipmode. The drawnings. The idea is to place the mobo under 45 degrees and putting the pump and reservoir behind the front.I also gonna use 2 koenigsegg doors in this project. Sponsors : Hardware : Proc : i5 750 Mobo : Asus P7P55D Mem : 8gb corsair dominator 1600c8 Vid : ATI Radeon 4870x2 Sound : Onboard Hdd 1 : OCZ vertex 2 60gb Hdd 2 : WD raptor 150gb Hdd 3 : WD raptor 150gb Psu : Cooler Master Silent Pro Gold 800W Cooling : Pump : Laing DDC-1Plus MCP355 + Bitspower top Rad : EK Coolstream XTC 420 Res : Custom Vga : Bitspower black freezer Cpu : EK Supreme HF Mem : Bitspower galaxy freezer The hardware I'm still collecting.The material I will use will be a combination of steel and aluminum or stainless steel.The color of all I have in my head but as the build progresses can still change.The goal is to make everything as clean as possible to show. Now it's time to start the project. The Frame. Cutting the frame. The cutting work is completed so now its time to putt it together. Below I have 4 right-angled corners welded. The sides. The sides are ready now so I will compile the entire frame. The frame is finished so now its time to make the plates for the levelers. The frame is finished. The frame is finished, so now its time to make the custom hinges for the Koenigsegg doors. The drawings of custom hinges. I hope you can understand my dutchy english.Untill the next update.