Discussion in 'Project Logs' started by Paslis, 13 Jun 2011.
Thank you very much Andersen1337 and how much it costs for building one i dont know yet.
Love the metalwork here, fantastic job with the welds and fabrication
Like the concept too
Look forwards to seeing the results!
Thank you very much Tech_Jakl.
Update 9 - 10 Oct 2011 -
The last 2 weeks of my holidays me and my wife were repainting the house inside and out.Also new floors and re newing some things.5 weeks ago i was almost finisht and i fell down and broke me a rib so again no modding.Now im recovered and its time to do some modding again.
First i took apart the lamptron fc8 fancontroller.Then i drilled the holes for the buttons and leds and mount it inside the case and this is how it looks.
Now this is finisht i can go further with making a bracket for the lcd screen.The screen i had was broken so i had to buy a new one.
The dimensions of this lcd screen were bigger so i had to make the hole bigger in the mobo plate.
Now this is finisht i can make the bracket.The screen has a plate on the backside with 4 holes in it.These holes im using for the bracket to mount the screen on.
Im using 2mm alu for the plate and 4x 10mm stainless steel standoffs with a lenght of 30mm.
First i drilled the holes in the standoffs and tapped them with m5.
The i cut me a piece of alu and drilled the mounting holes for the screen and for the standoffs.
Then i mount the bracket on the screen.
And this is how it looks inside the case.
Im happy im back to modding again so more updates to come.
Welcome back to modding! I love the orientation of the motherboard tray,
Its much more showwy offfy than the norm and as for the screen well that is a nice idea also
Thank you RedManc.
I am not one to blow smoke up folks ar5es, but I like this log/ build lots
I especially like the tilt inspired door, mobo tray angle and the integral cut fan holes
Dave, your amazing way with words never ceases to impress me..
Glad to see you back on the job here mate.
Keep the good stuff coming!!!
Awesome as always. I just doubt the fan grill cutouts though.
Thank you Blarte.
Thank you jeckulz and im glad to be back.
Thank you Nitrixflare.
Update 10. -15oct 2011-
Today i made the intake..The piece im using is the piece i cut away from the mobo tray.
Its this piece.
First i cut both side pieces and i used 2mm alu.
Then spotwelded them on the plate.
Then i drilled the holes for the 120mm casefand and countersunk the holes.
And this is how it lookes for now.
This was it for today but im back tomorrow with a fresh update.
Whoa, epic welding skills! Overall its looking great too, subbed
Thank you Archer.
To quote Bob Hoskins from an old advert.."its good to talk" lol
This build is fantastic. You're clearly a really creative mind.
Oh my nom nom nom ... I spend so MUCH time on this forum and I only see this now ! How could I have missed that thread ? You're an artist, so perfectly built
Very beautiful work mate. I'm definitely following this, I really want to see the end result .
Thank you Hannes.
Thank you GuilleAcoustic and im glad you see it now.
Thank you yassarikhan and you will see the end result.
Update 11. 31Oct 2011
I was trying to put all the cables below the mobo but the space was to little to putt all of them below so i had to make some extra holes for the cables.
The extra holes are made and i putt in the holes for the fillports.
Then i putt the case together again and went home to fit the hardware in.
Then i start with the plumbing and this is how it looks at this moment.
Im still busy whit sleeving and fitting the hardware so more to come.
Separate names with a comma.