1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scratch Build – In Progress Project: GALLUZZO-I < 2 Aug. update: Swithes >

Discussion in 'Project Logs' started by L1U, 1 Sep 2011.

  1. L1U

    L1U Member

    Joined:
    1 Sep 2011
    Posts:
    106
    Likes Received:
    4
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    update 23 - Sleeving and pass-trough (list of all updates)

    Hey guys! I'm back with some more slleving today!

    But first, come custom perspex parts to be used in the process :dremel:

    Drawning reference points and lines

    [​IMG]

    a little cutting

    [​IMG]

    [​IMG]

    measuring sleeved cables diameter: 3.00 mm

    [​IMG]

    drilled holes

    [​IMG]

    and sanded the edge: 320-600-800

    [​IMG]

    parts done for the 2x6pin connectors

    [​IMG]

    removing pins

    [​IMG]

    pass-trough

    [​IMG]

    first impresion mounted

    [​IMG]

    [​IMG]

    now working on the 8-pin EPS

    [​IMG]

    parts

    [​IMG]

    8-pin EPS result

    [​IMG]

    and finally 24-pin connector

    [​IMG]

    [​IMG]

    [​IMG]

    done for today!

    see you soon for more updates!!!
     
  2. Martininho

    Martininho New Member

    Joined:
    8 Feb 2012
    Posts:
    27
    Likes Received:
    0
    Neat looking project. Guess ill have to start doing something soon too :( :rock:
     
  3. L1U

    L1U Member

    Joined:
    1 Sep 2011
    Posts:
    106
    Likes Received:
    4
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    update 24 - Light Switches (list of all updates)

    Hi guys, its'been a loooooooooooooooooooooooong time since my last update, I had a really hard time studying and some quite tough personal stuff going on too...

    BUT

    now I'm back (yay!)

    Today I spent some time building the little switches panel for the rear of the case, it will also work as a pass-trough for cables to the mobo

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    the revoltek cold cathode's pcb naked

    [​IMG]

    panel installed after soldering the neon power cables to the switch

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    enough for today, more updates very soon (I promise) :D
     

Share This Page