1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scratch Build – In Progress [Project] Gas D3sk Build

Discussion in 'Project Logs' started by Gas_designs, 2 Oct 2014.

  1. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1


    Hi boys, are just subscribed me, I want to also share with you my first Cross D3sk
    You excuse my English, use a translator....
    I am Italian :D
    I start with to bring the various measures of the cuts to do to the firm that folding.....
    Here the plate thickness 1,5mm :D

    I leave you to the first image. :thumb:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    ...... :thumb:
     
    Last edited: 28 Mar 2015
  2. Dragonith

    Dragonith What's a Dremel?

    Joined:
    4 May 2010
    Posts:
    18
    Likes Received:
    1
    I love desk mods, I'll sub see where you take this one!
    For now, all I can say is you do have quite a good drawing and cutting technique!
     
  3. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    It now touches to the central plate, that must be cut for being able to insert us the mortherboard::** :D

    [​IMG]

    Go with the holes::** :dremel:

    [​IMG]

    [​IMG]

    [​IMG]

    :thumb:

    [​IMG]

    I now insert the outdistance them some mortherboard::**

    [​IMG]

    These 2 aluminum plates will go on the part DX and sSX :hehe:

    [​IMG]

    ........... :thumb:

    Excuse my English. :rolleyes:
     
  4. jojoharalds

    jojoharalds Minimodder

    Joined:
    30 Apr 2014
    Posts:
    441
    Likes Received:
    2
    looking good ,
     
  5. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Ok I now start to cut out me the dividing panel in aluminum::** :D

    [​IMG]

    Now start to cut::** :dremel:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    .............. :clap:
     
  6. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
  7. Cheapskate

    Cheapskate Insane? or just stupid?

    Joined:
    13 May 2007
    Posts:
    12,233
    Likes Received:
    1,817
  8. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Continuous with to realize the windows forLCD ed SSD :hehe:

    [​IMG]

    [​IMG]

    [​IMG]

    Now the left side::*

    [​IMG]

    [​IMG]

    [​IMG]

    I now make the window for the dvd::*

    [​IMG]

    [​IMG]

    Same window on the left part::*

    [​IMG]

    [​IMG]

    ............... :clap:
     
  9. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Ok, now trace the 3 holes of the anterior fans, where then I position there the grate from 360::* :D

    [​IMG]

    Down of handcuff dremel::* ::dremel:

    [​IMG]

    [​IMG]

    Et voilà :)

    [​IMG]

    [​IMG]

    ............... :clap:
     
  10. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    I start with to fix the zone of the HD::* :D

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    ........... :clap:
     
  11. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Now in the back part of the Hd I position there her DCC :D

    [​IMG]
     
  12. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    I now pass to the other ledge after having marked well it for::*

    [​IMG]

    And I go to perforate::*

    [​IMG]

    [​IMG]

    I add some provisional gomminis::*

    [​IMG]

    It is fixed also the reservoir::*

    [​IMG]

    [​IMG]
     
  13. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Now in the back zone, I make the holes for the fans.... here it will also go then us the radiator::*

    [​IMG]

    :dremel:

    [​IMG]

    [​IMG]

    [​IMG]

    Now make the same holes, but in the part of the plan of the reservoir, from where it will fish the fresh air::*

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    :thumb: :thumb:
     
  14. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Now comes the moment to make the holes for the passage of the pipes of the liquid::* :asd:

    [​IMG]

    I start with the reservoir::* :dremel:

    [​IMG]

    [​IMG]

    :dremel::clap:

    [​IMG]

    [​IMG]

    [​IMG]

    ................. :D
     
  15. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Other aluminum plate to be modified :D

    [​IMG]

    And after a hour of job :dremel: :dremel:

    [​IMG]

    Rheobus::* ;)

    [​IMG]

    [​IMG]

    [​IMG]
     
  16. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    :D
    Today I have made a test climbing on the whole HW in the desk, to see if it were everything ok, and that there were no errors::* :gosh

    [​IMG]

    [​IMG]

    Then I have gotten off the everything, and I am ready to bring the reservoir in firm, for the dust sabbiatura of glass, and then a beautiful dust painting opaque black opossidica.... :asd

    [​IMG]
     
  17. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Hello guys :D

    Today I have gone in firm to withdraw the Cross D3sk :clap: :clap:
    This morning to the job I was impatient to see..... :grr:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    ......... :jawdrop: :jawdrop:
     
  18. Mockingbird

    Mockingbird What's a Dremel?

    Joined:
    7 Sep 2011
    Posts:
    136
    Likes Received:
    2
    Wow! What a transformation.

    Part of me was hoping you'd keep the discoloured metal and just seal it - it looked very industrial/grungy, but the black looks great.

    Is it powder coated?
     
  19. Gas_designs

    Gas_designs Minimodder

    Joined:
    29 Sep 2014
    Posts:
    150
    Likes Received:
    1
    Yes, dust painting :thumb:

    [​IMG]
     
  20. l3p

    l3p www.^.nl

    Joined:
    1 Nov 2010
    Posts:
    832
    Likes Received:
    71
    'Cross D3sk' :hip:

    I'm following :)
     

Share This Page