Hello guys, This log will be very quick as it is practically now completed and being leak tested. I was given this case and fans by Nanoxia, primarily to write a review, but they also wanted to see what could be done with a DS2 as they were convinced that only a slim 240mm rad could be mounted to the pre-existing shroud on the Hard drive cages. I thought, whilst i am at it, ill make a computer for my friend, who has always want a gaming system but never gotten around to actually getting one. First off i would like to say thanks to Nanoxia, Eddy, you are a star, thanks very much for letting me use this case and for the opportunities you have given me. Another Thank you to Pascal at Alphacool who has supplies all of the water cooling that i needed for this, thanks mate couldn't have been done without you! Cheers to Silverstone for supplying a 850w PSU which will have enough juice if another 680 is added a little later! Another Thanks to Western Digital for supplying some storage for this build, a 500gb Caviar Green. And thanks to Mr. James Churchill AKA Pexon for the sleeving, MDPC is just brilliant sleeve Now for a few specs and parts. Motherboard: MSI Z77 Mpower CPU: Intel i5 3570K RAM: 8gb G.Skill TridentX @2400mhz GPU: EVGA GTX 680 Signature 2 PSU: Silverstone Strider Plus 850W SSD: 240gb Mushkin Chronos HDD: 500gb Western Digital Caviar Green Case: Nanoxia Deep Silence 2 Fans: 9x Nanoxia Deep Silence 1200RPM Watercooling Pump: Alphacool D5 Vario with Alphacool Top Reservoir: Bitspower 150 Z-Multi GPU: Alphacool Nexxos GTX 680 CPU: Alphacool XP3 Radiator: Alphacool 360mm Monsta Fittings: Alphacool all copper compression fittings Coolant: Mayhems X1 UV Green Below are a few pictures of the build. to make the Radiator fit in the front of the case, i had to drill out all of the rivets holding the drive and optical bays in place then it was a simple case of bolting the radiator to the pre-existing grill in the front of the case. The top fans are not bolted to the case but can breath due to the Drive bay covers being meshed and allowing for airflow. I will post up come more photos when it is finished and show where i have mounted the storage devices. BEWARE NERD PORN THE COOLER IS OFF!!!!