Hello everyone, I recently did a Custom build for icemodz,(Custom sleeviing copmany in iceland) Thought i share the progress with you, hopefully you like it. https://www.icemodz.eu/ System specs: Case - Aerocool Deadsilence Black edition CPU:Intel 6600K RAM:G.skill 32Gb Trident Z MB:Gigabyte GA-Z170MX Gaming 5 PSU:1000W Thermal Take GPU:Asus 280x Matrix Platinum SSD:Samsung 950 nvme The purpose of this Build was mainly to showcase some of the products that are sold over at http://icemodz.com Cables,led´s,and barrow watercooling fittings and tubing. Here are some shots of progress and in the end there will be the HD Shots of the finshed product. Enjoy!! First i cleaned all the watercooling gear,like gpu,radiator and reservoir,to make sure no gunk or unwanted particles are get stuck . and then i did a testfit of the hardware so i can make the minor adjustments that where needed, (like a cutout for the PSU)
lso for this project the customer had some custom acrylic front panel idea that really put the right touch on the build, but not without the matt black paint ,since the glossy acrylic look would not had fitted as nicely.
And here are the final HD pictures of the fully finished build. If you are interested in seeing the Project Icemodz Vol 2. Head on over to my facebook page and follow me there. @JHPCmods https://www.facebook.com/JHPCmods/?view_public_for=300977316984948
