Case Mod - In Progress Project Indigo / Define R5 ( Completed )

So I decided to Go on and I am going to implement those alu rings on my fans.







Also got some new stuff in for my open air bench from www.highflow.nl <<=>> Very Fast shipping from them
















Thank you for stopping by...

 

Small update.

 

So the window has been inserted but the plastic cover inside I will leave on for now to minimize scratches until the build is finished

 

been cutting the smoked acrylic front panel. only have 1200 grit sandpaper at the moment so finishing touches tomorrow
Anyone know some good polish products other than Novas ?















thats it for now... I will upload more soon guys

 

been working on M4,nuts and screws

 

the front is almost complete












thank you all for coming by !

 

Well since I am waiting for watercooling parts and I am bored I Decided to put things together and go oldscool and softtube the system up since I am short of GPU, one more Rad + some Fans But I managed to redo my PSU cover from plexi












PETG Hardline coming soon but first Softubeing

 

Hi and today I got me some new Fans from IDCooling from www.icemodz.com













Hope you enjoy and have a nice modding my friends

 

Hello just a small update this time.
I am struggling having to decide if I should loop up or wait for a few days but I am missing one 60mm thick Rad which I will replace and put that 45mm thick in the roof or the floor.
But I am having Fun trying setup out with different settings and all that





Also I have a D5 cover kit on the way so This is not the Final res,pump config



have fun you all.

Icelander

 

Just had some change of Plans. I am going to dress the case inside from the IO and the gap between the motherboard and the Rad with 6mm thick smoked acrylic panel. I really think that will look better and more complete mod inside of the case right ?





thank you for stopping by.

Stay tuned for more

 

Little or should I say a Big update for me at least.
I am proud to announce new sponsor to my project.
Bitspower will be handling all my fittings, and other Wc parts
Black Sparkle fittings...

















and one more Rad for the build.


And I got a vacation time ahead with my family so after few days I will return to finish the Project Indigo my friends




Thanks to my Sponsors.

 

Congratz

 

Thankx

 

once again a update in form of an SSD and a D5 mod placement...









Cutting the Psu cover.








I will put some plate on the bottom which also lifts up the pump/res config which is great.



Stay Tuned for more.

Thanks to my sponsors for making this project possible.

www.icemodz.com & www.bitspower.com.tw

Icelander

 

here is the first tube run for my loop





Thanks to my Sponsors





Stay Tuned for more

 

Going to close the top of the case with 5mm smoked acrilyc but do a cutout for the top rad as an air exhaust.

 

some pics of the roof of the case...









Stay tuned for more

Ice

 

All right now I just need spacers to lift it a little bit more and fasten the thing...






Reflection Time



come soon for more.

Thanks, Ice