Allright this is my first post on the forums and since these are modding forums I figured I would show off my current mod project. For me this is project 3. Enough about me lets see what I have done so far: Here is what I started with: Here is how it looks after I sanded down the side panels and top: Spent about 1.5hrs on each side panel and about a hr. on the top all sanded by hand without a sanding block. (the top actually looks alot better but due to the light outside it looks dull.) Here is the side panel after I cut out the first window: Here is the Cut I did for the other side: after 2 reinforced cutting disks and 30 regular cutting disks I came up with what u see in the 3rd pic Not much done here just cut out the stock fan grill off the front to allow greater air flow: Here is a pic of what the front is going to look like: And here is my most recent work which I did today: Only took me about 3hrs give or take Tell me what u think and if u have any ideas for me... if ya dont like it feel free to say but tell me why . I will be sure to keep u up to date as I progress with work I don't have alot of time to work on it. MOD ON!!!!!!!