1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scratch Build – In Progress Project: Iron Revenge -- Finished--

Discussion in 'Project Logs' started by Herodj95, 9 Sep 2011.

  1. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    Purchasing Day :hehe:

    I'm going to buy some thing for my Iron Revenge...
    [​IMG]

    2 black satin spray (but in this mod i use one other color for the front panel :)
    2 sheets of acrylic
    2 packs of screws

    now see my favorite screws :blush:
    [​IMG]


    After this I going to get the measure to create the lateral panels (thee will only acrylic)
    [​IMG]

    and the first is cut...
    [​IMG]
    Can you see the little recess of the structure than the panels... then, i have do it to encase the acrylic sheet on it to have an homogeneous structure :)

    [​IMG]

    ok guys, for today i close there....

    See later :D:thumb:
     
    Jampotp likes this.
  2. Jampotp

    Jampotp dem spacers are well phat init blud

    Joined:
    11 May 2010
    Posts:
    50
    Likes Received:
    1
    Great work! The "Iron Revenge" text looks really good - and you did all that with a Dremel!? :clap:
     
  3. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    thanks :)
    Yes i have do that all with the dremel! :thumb:
     
  4. L1U

    L1U Member

    Joined:
    1 Sep 2011
    Posts:
    106
    Likes Received:
    4
    can't wait do see your dremel skills ;)

    (in bocca al lupo)
     
  5. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    Thank you L1U :)

    ok, start with other up :D

    now, i have get one other iron sheet!

    There i'm going to install 2 80mm T.B Silence, an usb Hub and the power botton!
    Start whit the allogement of the fan...

    [​IMG]

    [​IMG]

    And you can see the future position of the hub! i'm going to do an hard work of file!
    [​IMG]

    and this is the hub where i'm going to install!
    [​IMG]

    after the other works i'm going to try the sheet on the top!
    [​IMG]

    [​IMG]

    After i'm going to cut the 2 pieces signed!

    ok, now i show you the top complete! :D
    [​IMG]

    the usb hub cutted!
    [​IMG]

    and the space to fix the fans...

    now i'm going to install the hub...
    [​IMG]

    Yeah!
    [​IMG]

    .....
     
  6. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    now i show you the guide to fix the engraved sheet :)

    Cut 2 pieces of angular...
    [​IMG]

    With the silicon i fix the at the panels...
    [​IMG]

    When it is dry I try the guide!
    [​IMG]

    [​IMG]

    Good! :clap:

    ....

    when i finish the guide i have cutted the panel for the 120mm fans on the front panels!
    [​IMG]

    ....

    now i'm going to fix the power supply...
    but i don't fix it whit the all chassis but i'm going to delete it and use only the pcb....

    Cut a piece of iron sheet...
    [​IMG]

    bended!
    [​IMG]

    and there is its future space...
    [​IMG]

    after i cut a piece of plywood and i have create the base of pcb...
    [​IMG]

    paint it!
    [​IMG]

    and this is the final result!
    [​IMG]

    [​IMG]

    at the next up i show you the power supply pcb installed on it! :)
    But this you can see tomorrow! :D

    Bye bye! :dremel:
     
  7. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    hey guys! other updeates! :D

    Today i have create a panel for power sypply card!
    [​IMG]

    on it i have installed the power connection and the switch to turn on/off the neon! ;)

    After this i'm going to paint it...
    [​IMG]

    and now is installed on the back panel of the case...
    [​IMG]

    And there are the holes to block the powers supply support...
    [​IMG]

    installed (yes, when i'm going to assemble the case i change the card ;))
    [​IMG]

    [​IMG]

    all closed! (sorry for bad photo :()
    [​IMG]
     
  8. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    now i'm going to fix the top!

    i cut other angular and i fix they with the silicon...
    [​IMG]

    when it is dry i can take off the clamps...
    [​IMG]

    try it!
    [​IMG]

    Perfect! :)
    [​IMG]

    there is the interior...
    [​IMG]

    now i'm going to to the holes on the top to fix it!
    [​IMG]

    and.... i have cut the screws!
    [​IMG]

    ....

    ok, we are a good point!

    Before close i have do 2 holes at the mobo structure to pass the cables behind the mobo plate from the base (where is the accomodation of the power supply)
    [​IMG]

    and next i do 2 other holes for 2 screws useful to block the base at the mobo structure....
    [​IMG]

    [​IMG]

    ok guys.... for today that's all!

    no! i have get this mini-pack.... what's into it??
    [​IMG]

    At the next UP :p

    Bye bye ;)
     
  9. yassarikhan786

    yassarikhan786 Ultramodder(Not)

    Joined:
    10 Aug 2011
    Posts:
    1,235
    Likes Received:
    49
    Very nice work mate :).
     
  10. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    thanks :)
     
  11. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    Hero is back! :)

    Today i show you the content of the pack!

    there is the content!
    [​IMG]
    :rock: :rock::rock:

    of these 2 i'm going to use (at the moment) one of there.... this!
    [​IMG]

    This is the back of the bottons!
    [​IMG]

    there is the final result!
    [​IMG]

    1 line for the power and 1 for the light!


    Yeah!
    [​IMG]

    Now, i'm going to install it into the top panel!
    That's a big hole (19mm)
    [​IMG]

    [​IMG]

    fix on the power botton!
    [​IMG]

    turn on the led!
    [​IMG]

    A general looking!
    [​IMG]

    ....
     
  12. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    the top is finished and i can paint it!

    There is the result!
    [​IMG]

    Botton installed!
    [​IMG]

    and this is a test with the screws....
    [​IMG]

    and install the usb hub!
    [​IMG]

    get the acrylic panel for T.B. Silence 80mm!
    [​IMG]

    [​IMG]

    I like it! :D
    [​IMG]

    a fast test on the top!
    [​IMG]

    ....
     
  13. Big_malc

    Big_malc Well-Known Member

    Joined:
    7 Sep 2010
    Posts:
    1,618
    Likes Received:
    80
    Socket head bolt not screw :thumb:
    [​IMG]
     
  14. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    now i have create a little cage for the Cd burner and the hard drive!
    [​IMG]

    [​IMG]

    and this is his future allogement!
    [​IMG]

    and i paint it!
    [​IMG]
     
  15. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    sorry but I didn't know their english name! :)
     
  16. Big_malc

    Big_malc Well-Known Member

    Joined:
    7 Sep 2010
    Posts:
    1,618
    Likes Received:
    80
    was only kidding m8 :p you going to spray all of case or go for a powder coat ??

    nice work on little bracket for hdd and drive :thumb:
     
  17. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    now i start to paint the other parts!

    start with the engraved sheet!
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  18. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    Thanks :)

    I'm going to paint all case pieces whit a satin black, but the front will paint whit a galvanizing spray ;)
     
  19. Herodj95

    Herodj95 New Member

    Joined:
    9 Sep 2011
    Posts:
    133
    Likes Received:
    4
    And after a long day of paint this is the result and all the component (without the hardware) that i'm going to install!

    [​IMG]

    Who want to see the the case installed??? :D
     
  20. Big_malc

    Big_malc Well-Known Member

    Joined:
    7 Sep 2010
    Posts:
    1,618
    Likes Received:
    80
    careful with galvanizing spray can clog and run like a bitch
     

Share This Page