1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Project M1

Discussion in 'Project Logs' started by Cpt.Zakhar, 27 May 2019.

  1. Cpt.Zakhar

    Cpt.Zakhar What's a Dremel?

    Joined:
    25 May 2019
    Posts:
    18
    Likes Received:
    7
    It's been a long time since I’ve this idea in my mind to make ITX CASE and several time I designed many cases with different ideas but Unfortunately none of them goes further than that
    but in few months ago I started to design a new project and its almost toke around 120 hours to be completed
    the entire case will be built by 4 mm & 10 mm aluminum sheet and the entire fittings, tubing will be custom made as well as Distro Plate.

    Spec:
    M.B: Asus ROG Strix Z390-I
    CPU: Intel Core i7-8700K
    VGA: NVIDIA GeForce GTX 1080 Ti FE
    Ram: Corsair Dominator Platinum 32GB (2x16GB) 3000MHz C15
    PSU: Corsair SF600 Platinum
    Storage: Samsung 970 EVO Plus 500GB

     
    Last edited: 28 May 2019
    Dot_Kappa likes this.
  2. Cpt.Zakhar

    Cpt.Zakhar What's a Dremel?

    Joined:
    25 May 2019
    Posts:
    18
    Likes Received:
    7
    Update #1

    I made a few fittings with 20mm brass tube and they look good and I’m happy with the results.
    also made a reservoir out of curiosity, which is very heavy due to the weight of brass

    [​IMG][​IMG]
    [​IMG][​IMG]


    [​IMG]
    [​IMG]
     
    Last edited: 28 May 2019
    arduum, Dot_Kappa and Cheapskate like this.
  3. kim

    kim hardware addict

    Joined:
    10 Jan 2016
    Posts:
    1,290
    Likes Received:
    608
    wow, heavy metal modding here :jawdrop:, renders are more than yummy :naughty:...I feel a stunning mod coming to life :dremel:
     
    Cpt.Zakhar likes this.
  4. Cpt.Zakhar

    Cpt.Zakhar What's a Dremel?

    Joined:
    25 May 2019
    Posts:
    18
    Likes Received:
    7
    Thank you for your kind word
     
  5. Cheapskate

    Cheapskate Insane? or just stupid?

    Joined:
    13 May 2007
    Posts:
    12,195
    Likes Received:
    1,796
    On your first project post, you pull out a lathe. :D I suspect you will be popular here. Welcome to BitTech.
     
    Cpt.Zakhar likes this.
  6. Cpt.Zakhar

    Cpt.Zakhar What's a Dremel?

    Joined:
    25 May 2019
    Posts:
    18
    Likes Received:
    7
    thank you, it's not mine but i wish i had one :grin:
    I'm not a moder and doing this out of curiosity.
     
  7. Dot_Kappa

    Dot_Kappa 100% Puppet

    Joined:
    23 Mar 2006
    Posts:
    349
    Likes Received:
    118
    Custom reservoir made of brass :clap:, I can't miss this log.
    What about the cylinder ?
    Remember, Glass is the way...:grin:

    Uh, you think so? :nono:
     
    Cpt.Zakhar likes this.
  8. Cpt.Zakhar

    Cpt.Zakhar What's a Dremel?

    Joined:
    25 May 2019
    Posts:
    18
    Likes Received:
    7
    yea, that's right. GO BIG or go home :thumb:

    it's so heavy, more than 3 pound just for Compare with EK-RES X3 250 it's 2.5 times heavier.:hehe: its hard to keep it in place :grin: it's easy to find acrylic tube but I'm thinking about glass.
     
    Last edited: 28 May 2019
  9. bolous

    bolous What's a Dremel?

    Joined:
    14 Nov 2012
    Posts:
    54
    Likes Received:
    4
    Great mod: from the model it seems very cool. Maybe it will be an hard work but incredible result. Chapeau!
     
    Cpt.Zakhar likes this.

Share This Page