Hi,This is my third case mod Link for first mod:http://www.overclock.net/t/1619098/case-mods-first-time-mod-project-sinanju#post_25729818 For 2nd :http://www.overclock.net/t/1624567/sponsored-project-honor-complete/20 For this time i try to mod based on osmium colour but its hard to get dark chrome colour so i just opt for what i got Before That i would really like to thank you to all those sponsor and trust for my case mod and first sponsored project Thermaltake = http://www.thermaltake.com/ Kingmax =http://www.kingmax.com.tw COVER 1 by Wan V, on Flickr Here the Spec For This Case Mod Thermaltake: View 71TG P1 Pacific Black Pump Pacific Flow Indicator 2 Pacific Temperature Sensor Pacific W4 Water Block RL11 Reservoir TT Sleeve Mod Cable Pack TT PREMIUM Plus FAN 3 PACK RGB V Tubler PETG TUBE 12mm Thermaltake Bending KIt 12mm Thermaltake Dye And Coolant Some TT Fitting 90 Degree Dual OD,Compression Fitting,Angle Fitting,And Extender M-pro New fitting Other parts Intel Core i7 6800k Strix X99 Kingmax Zeus Dragon 4x4Gb Kingmax SSD 240GB SME32 Design Will Be upload Thanks[/quote]
Finish product since its pretty hard to find people who can do chrome plating i just use some aerosol spray looks pretty good but the spray its pretty fragile
thanks will try it, its my first time trying to play with chrome is it any diff if use gloss clear coat compare to matt?
because this case mod base on chrome so i try to mirror finish all my part sanding you can see how rough it is done sanding with 360 grit
custom reservoir since i dont have access to cnc so i just user laser cut machine and will do 3 layer front res and floor even inside i will sand it through to get mirror finish
Starting to make my 3 layer Front custom res im using white rubber ring Rear Nut front screw Finish Product
Dissamble my waterblock to polish done sanding with 2000grit my ram block which i polish SRY FOR LOW QUALITY PIC MY CAMERA BODY GOT PROBLEM
Custom Floor Channel transparent silicone ring you can see im polishing inside out to get mirror finish
also im modding my own gpu waterblock disassembly since some of the part got frosted finish so i start sanding it with 400 grit and finish all of it with 2000 grit done polish and some mod if you realize what it is im changing the original plate to transparent acrylic and and all the bezel and polishing all by hand just not satifies with the screw need to use 12-13mm but i only got 16mm should bought more
Hi sry for long time to no update since im quite bz working nowday here my lates tprogress this is the right side left side back panel
