Right I dint mod for 2 day’s because I just got my drivers licence, so I had to pick up my mate and go to the mac drive. (golden moments ) I still needed some stuff, so I got into my car and whent tho the local hardware shop. With the nice weather the dwarf rabbit of my sister is loose in the backyard, the temptation was hard to resist but I dint mod him in the end. The mitre box works like a charm. The bottomplate is the only plate where ill be putting in pop rivets, cant see it anyway when its on the ground Closeup rivet. And the whole thing with evrything in place, it was a bit dark and the cam dint make a nice picture, not even with the flash on.
Aaaigt some new pix So time for a quick tutorial to make a baseplate. First get 4 pieces of alu and saw it in the mitre box. Then mark the places for the holes. Then just whack in a centerpoint for your drill and convenience then just drill the holes (duh) And u end up with this After that its just a matter of tapping in some screw wire or put in some pop rivets. A lot of work but well worth it as u can see
If the mods don't kill you for that huge sig, I will hunt you down and do it myself Nice mod there sir, kind of reminds me of an xbox sorta...
I kinda noticed their werent to many reply’s in my thread, what do I have to make to get you peepz wild Todat it was time to mount some plexi into the frame. I marked some holes and started drilling. Then just clamp a piece of plexi behind it, mark it and drill it sloooowly. Then I made a little hole for the fan, I did this using my 7 hole saw in my faithful Bosch handdrill Actually I find it a small wonder that it went right the first time without breaking the pexiglas /me placed a sidepannel just for the fun of it, u can see its getting shape a bit
extremely well done... and i dont know how you resisted the temptation to "Mod" the bunny, you are clearly a very patient man. I love the look of the side panel, hard work pays off.
ah, nice update =) do you use a battery-powerd drill for all tyour work? even for the ****load of holes you've just drilled?? =) if so, respect for that lol
how thick are those sheets of alumium, i hade some 1/16 and it cut fine with a few passes of a razor blade with a super clean edge
wpw this mod is looking extremely nice.... i can tell it will end up good.... good work so far, i'll be watching closely
i absolutely love what you are doing for the case. you seem to be taking your time, not rushing into things, so your not making constant mistakes. AWESOME! job on the sides. I hope the updates will be just as nice as they have been