1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - Complete Project Sentinel ON /IS

Discussion in 'Project Logs' started by TodMod, 17 Dec 2018.

  1. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    copertina.jpg
    Hi guys, I'm happy to have joined this fantastic forum.
    This project will be done on the chassis of an aerocool p7c1, and will go to revolutionize completely in its design. This mod will represent a robot sentry and I will be happy to show you the various updates until the final realization

    8.jpg


    1_ For a first step I will remove all the panels and have to create the space to insert a rad of 360 on top
    5.jpg

    6.jpg

    7.jpg
     
    Last edited: 21 Dec 2018
  2. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    good evening guys, the work on the sentinel on / is proceeding fast. now I started to smonatare the chassis and to modify it in the other parts to make it adaptable to the various panels in plexiglass, which I will go to realize and fold later

    IMG_1028 - Copia.JPG

    IMG_1029 - Copia.JPG

    now we begin to realize the first two panels that will have to be positioned in the vertical front of the case and that will have to be the same in all their parts because they will become mirror.

    1.jpg

    2.jpg

    3.jpg

    4.jpg

    I understand very well that you do not understand much about what the mod will look like, but of the old p7c1 it will only remain the chassis, even if this is also modified.
    this extreme "sentinel on / is" mod will be white and other small details in red and blue, which will cause me to change the color of the chassis.
    we'll talk to you soon and as always

    stay tuned
     
  3. Cheapskate

    Cheapskate Insane? or just stupid?

    Joined:
    13 May 2007
    Posts:
    10,186
    Likes Received:
    592
    I don't know what you have planned, but it looks like you know what you are doing. :D Welcome to BitTech. I like that movable desk top work area.
     
    TodMod likes this.
  4. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    Thank you so much, yes I already have in mind exactly about how it will be worth the MoD and have a very futuristic design in about 3 days I'll show the front of the case to make it clear look what the MoD will have

    Thank you for welcoming me on this fantastic community
     
  5. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    greetings guys as I said I hastened to carry on the work at the front of the case.
    so I proceeded with the treatment and folding of the 2 elements and the momentary installation to the chassis
    I put 2 fans on the radiator to evaluate well the thickness that it takes going to install a radiator of 4.5 that will arrive soon

    2.jpg

    3.jpg

    4.jpg

    5.jpg

    and finally 2 similar pieces that will be folded and applied on the upper and lower part of the case

    P_20180820_021218.jpg


    well guys I hope that now you begin to understand about the style that will 'follow this mod, in the next update I'll make you look at the front with some painted elements

    stay tuned
     
  6. DÈF¥âÑt¸.·´¯`¤

    DÈF¥âÑt¸.·´¯`¤ Active Member

    Joined:
    14 Sep 2004
    Posts:
    909
    Likes Received:
    245
    Wow! now i'm sitting up and taking notice ! Cant wait to see more :rock:
     
    TodMod likes this.
  7. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
  8. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    congtats, your mod and style are very cool!!:clap:
     
  9. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    happy holidays guys !!
    today I will show you the color and design that will take part of the model as you can see I went ahead with the work, I finished making the top and front panels, and also the front fairing, which I will be glad to show you finished in the next days at the moment and to be refinished and further modified

    P_20180821_031403 - Copia.jpg

    well guys now proceed to the final sanding for one of the 2 front panels

    IMG_0956 - Copia.JPG

    and now after 2 coats of blue background we proceed to the last 3 of white

    IMG_0958 - Copia.JPG

    now we proceed with the removal of the sticker and the realization, as always done freehand, of the frames

    IMG_0960 - Copia.JPG

    IMG_0962 - Copia.JPG

    well guys let me know that you think of the latest updates, we resend in the week with the update that will see the fairing finished and applied

    stay tuned :cooldude: :dremel: :naughty:
     
    Last edited: 26 Dec 2018
    _Prometheus_ likes this.
  10. DÈF¥âÑt¸.·´¯`¤

    DÈF¥âÑt¸.·´¯`¤ Active Member

    Joined:
    14 Sep 2004
    Posts:
    909
    Likes Received:
    245
    I'm tuned for some copulation!!!! :rock::rock::rock::rock::rock:
     
    TodMod likes this.
  11. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    :grin:AHAHAHAHAHAHAHAHAHAHA:grin: sorry, I just corrected :duh::duh:
    i can't stop laughing :grin::grin::grin::grin:
     
  12. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    hi guys, as promised today I show you the finished firing. it is only necessary to apply the wire mesh in the hole, which will be painted red and then applied.
    a very complicated job, I had to create 3 pieces in plexiglass full of angles and curves equal and symmetrical to 100%, considering that the work is done with scroll saw, and that they were then glued together.

    11.JPG

    22.JPG

    33.JPG

    and now let's see what the front side looks like

    44.JPG

    55.JPG

    66.JPG



    77.JPG


    Greetings from TodMod :thumb:
     
  13. DÈF¥âÑt¸.·´¯`¤

    DÈF¥âÑt¸.·´¯`¤ Active Member

    Joined:
    14 Sep 2004
    Posts:
    909
    Likes Received:
    245
    This mod is so on point love where it's going :rock::rock:
     
    TodMod likes this.
  14. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    :clap:
     
  15. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    greetings guys:clap:

    immediately ready with a new update.:rock:
    this time we would go to see the completion of the pieces that will be placed in the upper part of the case and that will give coverage, without obstructing the hot air coming out, of the radiator in the top.:thumb:

    1.JPG

    2.JPG

    and now let's see what I look like :cooldude:

    3.JPG

    well, now I'm planning to devote myself to the creation of the psu cover, to apply the wire mesh (in the spaces that we find now empty in the recently realized pieces) and to the painting of the cassis.

    see you soon guys:thumb:
     
  16. DÈF¥âÑt¸.·´¯`¤

    DÈF¥âÑt¸.·´¯`¤ Active Member

    Joined:
    14 Sep 2004
    Posts:
    909
    Likes Received:
    245
    Love your updates man ,really like the modular way the panels are attached the colour and thin lines work perfect :rock:
     
  17. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    thanks man !!:rock:
    I really studied a lot about what colors to pull in the mod, but now I'm really realizing that I made the right choice.:cooldude:
    the colors that go to remember the past times

    GUNDAM!!!!!!!:rock::rock::rock::rock::rock:


    ed9bfa6d-36c0-480b-8c41-8692b7eb4391.jpg
     
  18. Cheapskate

    Cheapskate Insane? or just stupid?

    Joined:
    13 May 2007
    Posts:
    10,186
    Likes Received:
    592
    Looking good. :thumb:
     
    TodMod likes this.
  19. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    Hi everyone :dremel: :cooldude:

    now the time has come to dedicate myself to the PSU cover.
    It will be made of 2 pieces, one that will be used for the management of the cables that will connect to the motherboard, the other that after being bent will be worked by creating frames, AS ALWAYS HANDMADE with interaction rgb with the LEDs positioned in future under the psu cover.

    7.JPG

    8.JPG


    6.JPG

    9.jpg

    Now let's take a look and see what this sentinel looks like with its first complete parts

    4.JPG

    5.JPG

    see you soon guys :thumb:
     
  20. TodMod

    TodMod New Member

    Joined:
    14 Dec 2018
    Posts:
    22
    Likes Received:
    15
    greeting guys,
    It's been a very busy week.
    but I still managed to carry on the work. Almost all the pieces of armor of the case are ready as you can see from the images.

    1.JPG

    2.JPG

    and now it's time to change the chassis color
    then we sand the chassis and give it new life!!!

    3.JPG

    4.jpg

    5.JPG

    6.JPG

    7.jpg

    8.jpg

    9.jpg

    we resend short guys

    MOD IT !!!!!!!!!!!
     

Share This Page