Discussion in 'Project Logs' started by sangyzan, 22 May 2015.
Thank you very much....i'm glad you like it
Hello to all .....
new update .... I painted the power of white, I have finished the midplate the psu, I attached the brackets of the tanks to the supports that I had created, I started the preparation of the fans and the radiator, and I entered the grills on the sides radiator ... what do you say?
Stay tuned and thanks to all for the support
Hello everyone, small upgrade ..
I installed the wb thermosphere Ek on the Inno3D gtx960 but unfortunately the card remained too bare so I decided to create a support for the two fans from the original vga and place them on either side of wb, I painted the white shells of the fans.
I believe that this choice is a good mix so the vga will be cooled completely, What do you think of this choice? Do You Like it?
Hello everyone .........
New arrival For Mod ..... I sincerely thanks Asrock for supported the project with this amazing motherboard "Asrock Z97 Extreme 6"
Power and elegance at the same time, for info on the product, visit the link:
but now enjoy the pictures
See you soon guys !!!
Hello guys ....
a small preview with hardware installed on hold the last components
what do you think?
Stay Tuned!!! kok:
waiting for the new arrivals I performed a small test of the LEDs on EkWB
see you soon
the watercooling on the gpu looks really nice peaking through the shroud. should perform nicely with the additional airflow around the vrm and such.
i really like the blue color on the watercooling in general
Thank you very much...I'm glad you like it ;-)
new arrival for the project Thaurus
I sincerely thank Thermaltake for supporting the project with these fantastic products that I think of excellent quality and well built
You can find the following material and other at this link
thanks again THERMALTAKE
Thermaltake Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Chrome
Thermaltake Pacific G1/4 Female to Male 20mm Extender – chrome
Thermaltake Pacific G1/4 Female to Female 10mm Extender – Chrome
Thermaltake Pacific G1/4 Male to Male 10mm Extender – Chrome
Thermaltake V-Tubler PETG Tube 5/8” (16mm) OD 500mm 4 Pack
Thermaltake Pacific G1/4 Stop Plug w/ O-Ring – Chrome/Black
Commander FT – Touchscreen Fan Controller
Stay Tuned !!!
new arrival for the Mod, Dimastech Black Push-Button with LED blue 19 mm
I sincerely thank Dimastech for supporting the project with these elegant buttons.
For info on the product you can visit the following link:http://shop.dimastech.it/pulsante-a...lack-19mm-id-azione-alternata-colore-led-blue
Thanks again Dimastech
Hello all ...... here's a little preview of the cables signed ModdingStylez that are coming for the project .... amazing job and fantastic colors ....
for information on these products please visit the following link:
I can not wait to touch them and see them in person Emoticon heart
Thank you very much Modding Stylez
Stay Tuned ;-)
And here is the written adhesive and logos that will be signed Modding Stylez applied to mod Thaurus.
Thank you so much modding Stylez for this fantastic work and for supporting the project ..... Thanks Again
For other works and information visit this link:
And here come the package from Modding Stylez ......
What can I say, everything was perfect, exceptional work and in more beautiful keychain created by hand. Thanks a lot
Now we have to install everything
Thanks again for the support modding Stylez and Matthias Bromel
See you soon!!
I suppose you like your motherboard A LOT!!! (42 photos, I think is a record...)
Like your mod, waiting updates
Hello to all ..... we arrived at the end of this mod, that is, first and foremost I would like to thank the guys of Hw legend and in particular Antonio for his kindness and professionality, all the sponsors who once believed in me and they have allowed me to build this project and to finish all the people who have followed the worklog ... thanks again.
Let's move on to the project, as far as I'm concerned I'm quite satisfied and I'm very happy with how it is in the final stage, I wanted to include glass panels smoked, but it is unfortunately something went wrong, and then I had to put the plexiglass panels.
Hope you like it........
Here are the final images:
Thanks again to all and see you soon to the next mod ;-)
As i mentioned before, the block peaking through the gpu shroud is such a nice feature.
The bend going from the gpu -> cpu block is also neat!
All in all, congratz with completing the build - wish i could find the time to complete mine soon...
Thank you very much mate ;-)...... i'm glad you like it ;-)
Separate names with a comma.