Hi Everyone, Its time for another project.My idea/design to build a desk inside a frame with a glass top and without feet ive done 2 times. Version 1. Version 2. I dont want to make a third version so now its time for a new design.This time i go for an ergonomic design.So this is the kickoff for my new project The Next Level. The idea is to build a design desk that can be adjust in height so everyone can sit at it by simply push a button to move it up or down.My designs always change when im building so here a drawning how its gonna look. The desk will be watercooled and the hardware is not decided yett.More about this later. I already bought the lifting column and this is how it looks. The specs. • Thrust: up to 2500 N per DL2 • Speed: up to 20 mm/s with CBD4 • Installation dimensions can be seen in the ordering example • Stroke length 300 mm, 350 mm, 500 mm ± 4 mm • Colour: Natural anodized aluminium profiles and black painted end plates or electro-galvanised 3 mm end plates • Low noise level • Compact and mounting friendly design • Built-in limit switches (not adjustable) • Dimension column: 147 x 194 mm • Dimension 8 mm end plates: 160 x 244 x 8 mm • Dimension 3 mm end plates: flush with the profiles • Each column is fitted with a 740 mm ± 60 mm straight black cable with an 8-pole AMP plug or 100 mm mini-fit cable • Dynamic bending moment (at 100% stroke length): My+/Mx+ = 250 Nm and My-/Mx- = 200 Nm And a little movie how it works. http://www.youtube.com/watch?v=61hPwaFKs1E Sponsored by: My head is full of new ideas so more to come.