Here I am for a small update. I sleeved and created some cables that I am gonna use with my mod! Here I used some cables that comes with fans etc. to create some moles extensions. Removed the molex. And eventually I left the cables only for better sleeving. Even though that these cables wont be visible I wanted to do something nice. And here they are finished: I found some splitters and I decided to use them. So I had to sleeve them too. I also changed the molex with some easy grab ones and also different color not like they will be visible but they are easier to use. My order arrived from MDPC-X and Mr.Nils signature as always unique !! Some red sleeving, rivets and M3 screws.... So here you are going to see me creating 4 PCI-E cables. I had to do this cause I couldnt find proper extensions. I used 20 meters wire, pins, a lot of sleeving and a looooooooooot of patience!!! Here are the original cables which I will disassemble so to see where the cables go from the one plug to the other and also cause I am going to use the PCI-E plugs. Passing the 8 wires through the sleeving. Striping the wires The cables ready for some sleeving Red and black sleeving and heatshrink ready So far so good! I added heatshrink to the inner part of the cable for extra durability Pins arrived eventually from USA (it took almost a month!) The worst part it was the "pins" one!! Even though I had a crimping tool a lot of cables had to be double making that impossible to use the tool or push them into the PCI-E plugs. Eventually after 4 and a half hours I managed to finish the cables. I eve applied the uneven technique here by placing the red - black sleeving in different patterns and also the heatshrink so they are 2 - 2 cables the same. See you soon guys. Please coment and feel free to post your ideas and impressions!