Case Mod - Complete Project Tower 900 Taichi Style

Discussion in 'Project Logs' started by Cristianodanna mod, 2 Sep 2017.

  1. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    IMG_8388.JPG IMG_8389.JPG IMG_8390.JPG IMG_8391.JPG Hello all, Boys, I will soon mix my next project, which will take place on the Thermaltake tower 900, which will be all in Taichi style, like the motherboard that montero .. It will be made of a double blue and purple loop, there will be some Side panels made by CNC DA Danilo Lettieri and backlit, with many other modifications you will see during the worklog. I attach the photos of the side panels in advance, as I did not plan because I have the ideas quite clear. Good worklog at all;)



    COMPONENT

    CASE THERMALTAKE TOWER 900

    MONTHERBOARD ASROCK Z270 TAICHI

    PROCESSOR INTEL I5 6600K

    VGA ASUS 1070 FOUNDERS EDITION

    RAM Apacer Panther rage 32 gb

    SSD Armor 240 gb

    WATERCOOLING THERMALTAKE



    Sponsor Thermaltake Thanks Andy cheng

    Sponsor Asrock Thanks Chris

    Sponsor Apacer Thanks Julie
     
  2. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
  3. jojoharalds

    jojoharalds Member

    Joined:
    30 Apr 2014
    Posts:
    441
    Likes Received:
    2
    First rule of bit-tech -
    first post of a buildlog has to contain "WORKPROGRESS".
     
  4. davido_labido

    davido_labido Your Alphacool Contact.

    Joined:
    11 Oct 2013
    Posts:
    465
    Likes Received:
    25
    Dietec likes this.
  5. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    Sorry, I seem to have done almost everything
     
  6. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    however I update you, led soldering for the box lighting installed on the bottom

    [​IMG]

    [​IMG]
     
  7. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    This is an approximate rendering of the project.
     

    Attached Files:

  8. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    small upgrade, paint the Thermaltake riing plus fans of Blue Fluo

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  9. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    here are the first two Cut Cnc panels by Danilo Lettieri

    [​IMG]

    [​IMG]
     
    Dietec likes this.
  10. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    other material for the Mod, Thanks for the support for Thermaltake and Andy

    [​IMG]
     
  11. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    I made the holes with the Dremel on the plexiglass is set the Reservoir

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  12. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    a bit of updates, a blue fluo midplate panel, I installed the internal panels and the reservoirs, and here's the fantastic Z270 taichi. Thanks to Asrock support


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  13. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    hey guys here are other updates
     
    Dietec likes this.
  14. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    Hi all guys, I'm almost at the end of the project, I attach some update
     

    Attached Files:

  15. galvinD

    galvinD New Member

    Joined:
    6 Nov 2017
    Posts:
    4
    Likes Received:
    2
    Looking great man! Well done
     
  16. Dietec

    Dietec New Member

    Joined:
    2 Oct 2017
    Posts:
    28
    Likes Received:
    4
    Those backlit cogs look awesome! I'm pumped to see the finished product. Good stuff :)
     
  17. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    Thanks you,today's final photos, stay tuned
     
  18. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
  19. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3
    Hi Guys, here are the final photos, hope you like it.
    thank you all my sponsors!

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  20. Cristianodanna mod

    Cristianodanna mod New Member

    Joined:
    16 Dec 2016
    Posts:
    20
    Likes Received:
    3

Share This Page