Project Tribal Dragons [front done::Now with 110 pics::UPDATED july 17th] well... after finishing me first project, I wanted to do another here's the victim... an old generic ugly case so here's the fun comming I'm cutting windows on the right and top panel. the top panel will have a tribal design in it. here it is half done from under it. and from above. you see the green markings that aren't cut yet but I should be done by tommorow and the icing on the cake, the right panel it's a tribal design with 2 winged dragons A friend of mine helped me with the drawing but it sure looks bad ass it SHOULD take me about 6 hours to cut it and ready to sand for painting now, I'm doing all the cuting with a dremel. I wanted to do it myself and not waterjet cut... it's going smootly so far also, I'll replace the face plate by a alu sheet with a plexi in 2 parts. the bottom part will be fixed but the higher part will be a door. The drives will be flush with the frame (which will be painted too). I'm gonna paint the case very dark charcoal metallic and I'll paint the tribal designs red metallic with an airbrush so what you think about it so far? any comments/suggestion?