who's Zak? Zak's my 8yr old son and i promised after i got thru with modding hpres2 and few other proggys id jazz up his Super Lan Boy case The idea will be to add plex panels and some sexy lighting with a industial look, keeping the whole mod basic but clean and sharp looking without loosing the SLB look he likes so much. Rather than pull down his current slb we decided a nice fresh case was the order of the day to start this mod with and some pre cut to side clear 4.5mm plex and 2 x defyant style full side mounted water res's. while zak pulls get a start and pulls down the case for cutting i get a start with the custom side res's These new models will have a "qick release" type mount. The end result after water testing. Next was to get a start on the plex side paneling. To give the case a hevy industrial look were attatching all the panels using hex head bolts and countersinking all the holes on the plex. a shaped hole is cut as to allow the Custom res's to "sit in" Holes are drilled and the side panel new plex panel and res's are bolted together.