Update! Hello! Time for a small update again, it's been a lot of planning the recent week in order to get the wiring as clean as possible, has tested alot and also destroyed some GPU cables so waiting for new ones that I ordered. However i have manage to do get some done, I chose to re-draw the tubing around the CPU so I do not need the 90-degree fittings: I have also sleeved the CPU cable: Then I install three switches to turn off or on my leds in the case, one for the white leds at the top of the case, one for GPU leds and one for the blue leds. I also drilled holes for GPU cables through my plexi plate: Waiting for my new GPU cables to arrive, then sleeve them. Then it's about time to start up the PC.