1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Modding psone screen help!!!

Discussion in 'Modding' started by Dean_j2001, 15 Sep 2004.

  1. Dean_j2001

    Dean_j2001 What's a Dremel?

    1 Apr 2003
    Likes Received:
    bought meself a nice new 'spiffing' sony psone screen today them official ones, damm sodding cheep soldering iron ive removed the tracks off the bottom pcb, (where u solder on the wires to convert to VGA,),

    now i need your all your guru help the header from the mainboard marked cn4 has 12outputs 2 for the power supply pcb, and the other 10 for the other pcb, would anyone be so kind as to be able to draw what each one is or how i wire it up or whateva, i dunno just anything im like totally f00kered soldering never was my good point

    please help

    thanks in advance

    p.s even if you cant can anyone with a screen post a picture of the pcb on the underside so i can find the original tracks :D thx
    Last edited: 15 Sep 2004
  2. livelife46290

    livelife46290 What's a Dremel?

    19 Sep 2003
    Likes Received:
    Try the home page first...or.... :search: but anyways check this out...its the article that bit-tech did on ps one screen in a computer....http://www.bit-tech.net/article/136/ so give it a shot.

Share This Page