Hi everyone Here's my another project. It will be an industrial case but whiout any rust or things like this. only chrome, stainless steel, perforated alu and black darked arcyclic here's the victim front: and here's some part from a water boiler in the middle there will be a power switch lighted in blue side: and here's the next part of today's work first "wave" of painting there will be a 120mm on the front
Interesting concept. Will it be watercooled?? Add a hose to that waterboiler piece to give it more industrial look (tubing, wires, etc...)
Something very different... Looks like a fun project, I have one of those blue neon tubes :d ... Post some more final pics when you are done.
That ccfl is a liquid neon, I think you all know what it is There will be two more blue CCFL's in the case. They will be blinking and here are some pics of what will be inside the case (not finnished yet)
You can see here where the PSU is http://members.lycos.co.uk/radex84/PM2/ofiara.jpg I think you were cheated by the earlier post where is some space over the PCI slots (that was NOT a room for PSU)
Sorry for the thread hijack RadeX... but: There's no no need to worry about DIY panels, if you don't have access to the right tools. You can buy many different kinds/designs of pre-cut mesh panels from any good modding shop nowadays - e.g. Kustom PCs here in the UK. There are bound to be a few stores over the water there offering the same sorta stuff
hey guys here's more pics from today I've bought two of this: and painted them into silver: It will be mounted here: I made some doors to have easy acces to the pci slots front will be looking more or less like this: and behind there will be a 120mm aerocool but I have a problem: a) cut the crate on the front to show off the 120mm b) do nothing and make as on picture above
