Cooling Recomend me some... 120mm fans

Discussion in 'Hardware' started by Hypnosam, 4 Aug 2010.

  1. Hypnosam

    Hypnosam What's a Dremel?

    Joined:
    12 Mar 2010
    Posts:
    147
    Likes Received:
    6
    Hi,

    I'm looking to add some new fans to my Antec 900, 2 120mm fans to be exact. I'm not worried about the noise of the fans, but Ideally I'd like some with high airflow, oh and the price has to be reasonable for them. Ideally both for under £15-18

    Thanks in advance, as I'm lost when it comes to fans.
     
  2. SmilerAl

    SmilerAl Terminate with extreme prejudice

    Joined:
    6 May 2010
    Posts:
    234
    Likes Received:
    2
    Sharkoon Silent Eagle
     
  3. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    7,942
    Likes Received:
    752
    Gentle Typhoons, bit more expensive but very high CFM with very little noise.
     
  4. Hypnosam

    Hypnosam What's a Dremel?

    Joined:
    12 Mar 2010
    Posts:
    147
    Likes Received:
    6
    Humm, the Sharkoons seem to have greater CFM. But the gental typhoons are much quieter - not sure this matters in the 900 much. Thanks for the replies.
     
  5. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    7,942
    Likes Received:
    752
    Where are you getting these specs? As if its anything but the CPC group test, the results will be very wrong.
     
  6. Hypnosam

    Hypnosam What's a Dremel?

    Joined:
    12 Mar 2010
    Posts:
    147
    Likes Received:
    6
    I was looking on etaillers websites with the technical specs - although I think I still have the fan review of CPC. Thanks for reminding me about it.
     
  7. jaggyman

    jaggyman What's a Dremel?

    Joined:
    15 Jul 2010
    Posts:
    18
    Likes Received:
    0
    BT did a round up of 120mm fans last year, reviews can be found here

    Got some Scythe Gentle Typhoons myself, cost around £11 each, pretty quiet and even quieter when I've set the fan controllers to low speed on the MB.
     
  8. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    7,942
    Likes Received:
    752
    Yeh, basically ignore the manufacturers spacs, as they're border line lies...

    Edit: The BT one is the same as the CPC one, only the CPC one goes onto more depth and includes 140mm fans too (which are rubbish)
     
  9. Hypnosam

    Hypnosam What's a Dremel?

    Joined:
    12 Mar 2010
    Posts:
    147
    Likes Received:
    6
    Yeah, I was supprised to see the 140mm fans doing so badly would of thought they'd at least be as good as the 120mm fans.
     
  10. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    7,942
    Likes Received:
    752
    Less R&D done with them, they just applied 120mm designs to a 140mm fan, leaves too many open spaces between the blades which reduces air flow and air pressure (at a guess)
     
  11. Bakes

    Bakes What's a Dremel?

    Joined:
    4 Jun 2010
    Posts:
    886
    Likes Received:
    17
    It's that the 120mm fans are the standard, so manufacturers invest in them. You invest in products that have high sales, and 120mm fans have been the standard size since 2006.

    You'd expect larger fans to move more air, but things don't always turn out that way, since scaling up isn't always a certain way to do it due to the aerodynamics of the whole thing (for example, the vortex control notches on the noctua fans might control vortexes at 120mm, but they might be in the wrong place or might be the wrong size when scaled up to 140mm - a very small number of choices also hurts the performance since most of the big names don't produce big fans in their popular lineups.
     
  12. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    7,942
    Likes Received:
    752
    That'll change, as just look at how many cases are out with 140+ fans as standard. 120 is now being phased out ot would seem.
     
  13. Bakes

    Bakes What's a Dremel?

    Joined:
    4 Jun 2010
    Posts:
    886
    Likes Received:
    17
    Depends on the manufacturer. It's mainly just Coolermaster on their HAF cases that are using 140mm fans in particular - Antec still use mostly 120mms and Silverstone are using 180mms on their FT series.
     
  14. Unicorn

    Unicorn Uniform November India

    Joined:
    25 Jul 2006
    Posts:
    12,726
    Likes Received:
    456
    Enermax make some fantastic 120mm fans. I use the Cluster and Twister series all the time. I've installed more of those fans than I could possibly count and people love them. They moce a lot of air, they're quiet, they're not outrageously expensive and the build quality is second to none. They have a great lifetime as well, as they use an advanced bearing system that far outlives traditional fan bearing techniques.

    Stay away from SilentX if they're still around, as they have a lifetime that's about half that of good case fans. They use a fluid bearing that is held by orings which wear with time, causing the bearing fluid to leak and the fan to fail. That happens after about a year of daily use in my experience.
     
  15. Bloody_Pete

    Bloody_Pete Technophile

    Joined:
    11 Aug 2008
    Posts:
    7,942
    Likes Received:
    752
    Coolermaster also do 200 and 230 fans for the HAFs too.
     
  16. Hypnosam

    Hypnosam What's a Dremel?

    Joined:
    12 Mar 2010
    Posts:
    147
    Likes Received:
    6
    Thanks for the input Unicorn. I'll take a look at them and the other options, the plus side is that they are cheaper than the other alternatives.
     
  17. TheBlackSwordsMan

    TheBlackSwordsMan Far over the misty mountains cold

    Joined:
    16 Aug 2009
    Posts:
    4,035
    Likes Received:
    448
    Depending of what you need

    1# Ebm Papst 4412 F/2GLL 1600RPM 26DBA 55CFM with Ceramic Sleeve bearing.

    2# Nexus (Yate Loon) D12SL-12 PWM 500-2000RPM 27DBA 76CFM with Sleeve Bearing.

    3# Xilence COOXPF120RPW 1500RPM 21 DBA 58CFM with fluid dynamic bearing.

    4# Scythe 4710KL-04W-B29-V52 1900RPM 31DBA 76CFM with Dual Ball Bearing.

    5# Noiseblucker MF12P 2000RPM 28DBA 78CFM with Nb-nanosli Bearing.


    And finally if you don't need a big CFM and want ultra quiet fan, go for Noctua.

    (Subjective DBA)
     
  18. Cus_de_Sparta65

    Cus_de_Sparta65 "There is no dremel"

    Joined:
    24 Apr 2009
    Posts:
    698
    Likes Received:
    34
    Coolermaster even have 200mm and a 140mm on their Storm Scout mid case and probably on the Storm Sniper as well i would guess.

    The Scout is quite a small case as well really
     
  19. mrhrk01

    mrhrk01 What's a Dremel?

    Joined:
    20 May 2010
    Posts:
    153
    Likes Received:
    2
  20. shoxicwaste

    shoxicwaste Minimodder

    Joined:
    2 Jul 2010
    Posts:
    248
    Likes Received:
    9
    get delta's they have over 200CFM and are 120mm, although they sound like jet engines.
     

Share This Page