So once again it's time for new project and this time I thought "why not build your own case?". The case will be 2mm thick steel, bent and lots of details cut out with laser. The thought of this project is that it's going to act as a rendering/streaming computer, but also act as a testbench. The top will be open so parts can be changed quite easily if you want to test other parts and make comparisons. The cpu will be watercooled, but with soft tubing instead of hard tubing since hard tubing would more or less kill the idea of a test bench... Parts that I'll be using in this project... CPU: AMD Ryzen 7 2700X Mobo: MSI X470 Gaming 7 GPU: MSI 1050 Ti 4GB Gaming X RAM: Team Group Delta Black RGB 3000Mhz 2x8GB SSD: Team Group Delta Black RGB 250GB PSU: be quiet! Straight Power 11 850W Fans: be quiet! SilentWings 3 PWM (2200rpm och 1450rpm) Water cooling All parts for water cooling is provided by Alphacool and I will be going through this in a post later on once these arrive. I will be using a 360 radiator in the front of the case and the pump/reservoar in the open top compartment. Pass throughs will be used for combining all parts and help get a minimalistic look... Case So far I've only created small sketches in paint and just thought about how it looks and made sure that all parts fit without a problem. I consider myself to be almost there, so very soon I'll sit down with a friend that knows his way around CAD and we'll create a file so we can get going with cutting all parts needed for the case. Pictures of all components and progress on the case will be posted as soon as they arrive or I've made some progress on the case! I hope you all want to follow me on my journey towards my first scratch build! A huge thanks to all my sponsors for making this project a reality!