Windows Router forwarding + VNC remote desktop...

Hi,
I have set up my linksys router to forward requests to specific ips.

Here is what the configuration looks like:
_________________________

OSXvnc - port 5900 to 5900 - TCP - 192.168.1.100

winVNC - port 5900 to 5900 - TCP - 192.168.1.101

_________________________

Above those are two different computers on the network running VNC (one is a mac and the other is a pc)

Obiously there are conflicts with this, as two different computers are using the same port. When I try to connect it simply doesn't work.
I know how how to change the port # on the OS X vnc version, but do not know how to change the port for the vnc client.
It would work if I changed the port of both the server and client and than updated the router information.

Please advise with any tips.

 

first off, welcome to the boards!

for connecting use {ip address}:{port}

you say windows sucks, but you use it

/me hides the fact that he dual-boots

 

thanks for the tip,
i was able to figure it out.
and yes, I do use windows, though its not my OS of choice, and it often crashes, and malfunctions.

 

Use nix then