Motherboards So my computer died overnight.

Discussion in 'Hardware' started by monteur, 25 Aug 2014.

  1. monteur

    monteur What's a Dremel?

    Joined:
    11 Apr 2011
    Posts:
    227
    Likes Received:
    3
    As stated in the title my main rig does not do anything anymore when i press the power button on the case or board.
    Since i first suspected the psu , i hooked it up to my old system, which booted as normal.

    I already talked to my retailer since i still have 1,5 month of warranty on it, but he told not keep my hopes up, because the RMA with Asrock will take atleast 4 weeks or even 8.

    Here are my questions:

    1. Can i do a mainboard swap without reinstalling windows? plug'n'play?

    2. Can anyone recommend me a So.1155 Board? :)

    Thank you very much.
     
  2. Dark Matter

    Dark Matter What's a Dremel?

    Joined:
    12 Mar 2010
    Posts:
    333
    Likes Received:
    3
    If it is a retail windows licence, should be fine to swap straight to a new board, sometimes may require a simple reactivation but otherwise should be straightforward.

    Budget for the board?

    Simon :)
     
  3. monteur

    monteur What's a Dremel?

    Joined:
    11 Apr 2011
    Posts:
    227
    Likes Received:
    3
    Budget would be ~80€ , thanks.
     
  4. LennyRhys

    LennyRhys Oink!

    Joined:
    16 May 2011
    Posts:
    6,131
    Likes Received:
    571
    Could also be the RAM or CPU even though it's very unlikely. Have you done the usual, eg:

    - check RAM modules one at a time, in all available slots
    - unplug from mains, drain PSU caps, remove battery for 15 mins, then try again
    - reseat CPU

    I wouldn't say motherboard was dead unless none of the above works.
     
  5. Nexxo

    Nexxo * Prefab Sprout – The King of Rock 'n' Roll

    Joined:
    23 Oct 2001
    Posts:
    34,540
    Likes Received:
    1,932
    I'm sorry for your loss. Now move on. :p

    On the upside: it's upgrade time! :D
     
  6. monteur

    monteur What's a Dremel?

    Joined:
    11 Apr 2011
    Posts:
    227
    Likes Received:
    3
    i will run the suggested checks from LennyRhys and report back.

    Oh, nexxo you.. i'm already fighting that little devil in my ear. :D
     
  7. Yadda

    Yadda Minimodder

    Joined:
    25 Jul 2003
    Posts:
    3,217
    Likes Received:
    49
    I wouldn't be happy with the warranty situation, are you sure they aren't trying to fob you off?
     
  8. monteur

    monteur What's a Dremel?

    Joined:
    11 Apr 2011
    Posts:
    227
    Likes Received:
    3
    trust me i'm not really happy about the situation here either.
     
  9. RagingMadman

    RagingMadman What's a Dremel?

    Joined:
    6 Oct 2012
    Posts:
    189
    Likes Received:
    4
    I would recommend Asus or GIGABYTE.
     
  10. monteur

    monteur What's a Dremel?

    Joined:
    11 Apr 2011
    Posts:
    227
    Likes Received:
    3
    i ran all the suggested checks, still nothing.. dead silence.
    i'm going send it in first thing tomorrow.
    and nexxo might be right about a upgrade. :worried:

    can i keep my 8gb ddr3 ram for a socket 1150 board?
     
    Last edited: 26 Aug 2014
  11. monteur

    monteur What's a Dremel?

    Joined:
    11 Apr 2011
    Posts:
    227
    Likes Received:
    3
    seems as if i can save some $ on the ddr3 :) im kinda on a tight budget right now for a upgrade but i need my rig. :)
     

Share This Page