1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Steam cuc's completed

Discussion in 'Project Logs' started by cucmag, 4 Sep 2014.

  1. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0


    hello :)
    you don't know me... perhaps my avatar :)
    so here I am full foot :hehe:

    [​IMG]


    And the one who is in the middle, or at least between my feet ... it's Xray!
    A small skeleton 15 cm high (I actually 185 ...:D).
    I could find a scanner that he spent during his last medical ...

    [​IMG]


    :D :D :D
    what did you expect
    - " :eeek:....:grr:"
    Oh hey! Mr gets angry :naughty:
    - "...."
    You know, June 21 is past and therefore with him summer settled and Xray took up residence ...

    [​IMG]


    But don't worry, it does not just lounging by the pool ...
    He can drink also :D

    [​IMG]


    No, it's not champagne but a beer ... champagne make him some headache...
    But this is the only glass that is its size :hehe:
    Speaking of beer ... here, late July we have the local festivities
    And clothing that goes well :)

    [​IMG]


    A time.... :rolleyes:....:duh:

    [​IMG]


    Otherwise Xray is engaged in other leisure such as the Djembe

    [​IMG]


    But his favorite hobby, and given the circumstances region in which we live, is surfing ...
    It was he who shape his boards

    [​IMG]


    And he begins to fend :hehe:
    Certainly it is not yet Teahupoo, but it must be a beginning :)

    [​IMG]


    That's all well and good !!! but modding !!!
    - "We prepare, we prepare ;)"
    :)
    - "This year is BeQuiet who dares us entrust his first case :)"
    :duh:
    - ":naughty:"​
     
    Last edited: 16 Oct 2014
  2. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    Hello all
    - “I would say good night ....”
    yeah well it depends on the time they read the post .... and then with the jet lag ....
    - “okay okay....”
    I repeat, where was I ...
    - “me :p"
    ouais..... but hey it does... Xray, so was quick to appear on the photos from the shoot
    - "I was not going to miss this opportunity!"
    where are you also ???

    [​IMG]


    - “heeeere !!!!”
    ben what are you doing up there?
    - "I did not want to overshadow the new case ..."
    houlalala !!! Mr would become humble ???
    - "I do not know, but certainly courteous ..."

    [​IMG]



    - "Then we attack :)"
    yes! but what are you doing with that stuff rubber !!!
    - "I wanted to show one last time :)"

    [​IMG]


    ok! and what we turn too?
    - "HDD cages :p"
    classic :rolleyes:
    - "And presto :)"
    euh .....:eeek: what are you doing Xray !!!
    - "Flexible :hehe:!!!"
    Hmm .... you would not be you, Be Aware :naughty:


    [​IMG]


    - "we will not use the SSD supports :) "
    ok

    [​IMG]


    see what remains of the chassis :)
    - "There is me :eyebrow:"
    ....euh that's when you want Xray?
    - "Bah what?"

    [​IMG]


    go out Xray !!!!
    - ":eyebrow: .... You can also back... :whistling:"
    :duh: not false ....

    [​IMG]


    - "cuc'! you pass me the tool that is well"
    which
    - "One who goes to party with many rivets :)"
    this one :)
    - "Yessss :thumb:"

    [​IMG]


    we attack ....
    - "facade :hip:"

    [​IMG]


    - "We took the opportunity to blow up the motherboard tray :)"
    :eeek: Without keeping ???
    - "I do not know yet ...."

    [​IMG]


    - "Okay .... things get complicated!"
    why do you say that?
    - "we have folds on plates !!! all in one somehow ....:duh:"
    :grr:

    [​IMG]


    :eeek: not only at the 5.25 cage "....
    - "As you say?"

    [​IMG]


    we take a look at the back of the chassis :)
    - "Are you sure ...."
    why do you say that ....:eyebrow:
    - "You risk ...."
    I do not! do not tell me ....:(

    [​IMG]


    - "We will have a little more work than expected :D"
    yeah ....
    - "Duh, we will put in the account aleas modding :D"
    :eek:tell me Xray
    - "Yes I do?"
    What is this thing that you have around your neck ....

    [​IMG]


    - "You mean my necklace :)"
    your necklace :eeek:
    - "Yes"
    you bought a necklace ....
    - "No! not purchased :D"

    [​IMG]


    where you took it? :duh:
    - "These are trophies :)"
    trophies :eyebrow:
    - "Yes! they are all the rivets that were blown up :D"


    [​IMG]


    - "I will have made another too :D"
    euh .... given the size, I can not put it around his neck :p
    - "It's true that I did a little too small for you ...."

    [​IMG]


    bref! Returning to the subject :)
    - "Yes .... quite ....."
    wow! :eeek:
    - "What?"
    just what is it?

    [​IMG]


    - "What what?"
    ben all that !!!! :eeek:
    ah! that! just the facade :D ...... cut .....

    [​IMG]


    - "...which originally was this :D"

    [​IMG]


    :eeek: you do not pretend !!!
    - "It's clear :hehe:"
    so it remains what on the facade ....
    - "Not more :naughty:"
    :duh:

    [​IMG]


    okay.....​
     
  3. KidMod-Southpaw

    KidMod-Southpaw Super Spamming Saiyan

    Joined:
    28 Sep 2010
    Posts:
    12,592
    Likes Received:
    558
    I don't know what's going on here, but I like it!
     
  4. leonetu

    leonetu New Member

    Joined:
    29 Oct 2013
    Posts:
    47
    Likes Received:
    0
    Dude with the red shorts definitely got my attention. Subbed!
     
  5. Nexxo

    Nexxo * Prefab Sprout – The King of Rock 'n' Roll

    Joined:
    23 Oct 2001
    Posts:
    34,110
    Likes Received:
    1,612
    Less gimmicks, more modding.
     
  6. aggression

    aggression New Member

    Joined:
    3 Feb 2013
    Posts:
    9
    Likes Received:
    0
    Funny, subbed :)
     
  7. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    thanks :)

    we continue :)
    - "coucou :)"
    right! after the front of the chassis ...
    - "We go to the bottom of the case :)"

    [​IMG]


    bah! it's down .... well below what :p
    - "And then :eyebrow:"
    what do you do with that part of the chassis ...
    - "we completely redeveloping the case"
    completely !!!!
    - "Yes! we will do home staging :D:D:D"

    [​IMG]


    :eeek: and why you take the grinder !!!!
    - "To cut :D"
    and Dremel ....

    [​IMG]


    - "Great for small cuts :)"
    certainly, but also for long, right? :)
    - "It can be done but it's longer and it eats more disk ...."
    Hmm ...
    - "Sure! looks disk size :D"

    [​IMG]


    :eeek::eyebrow::duh::duh::duh:
    - " :D "
    you did not go with the back of the spoon !!!!
    - "I needed space :hehe: :hehe: :hehe:"

    [​IMG]


    and space for!!!
    - "the idea is to incorporate a radiator 360 on the bottom of the case :)"

    [​IMG]


    where is??? :eyebrow:
    - "first I put the fans :) "

    [​IMG]


    It is clear that this is a sacred internal reorganization :worried:
    - ":)"
    and the power supply ???
    - "We'll see :)"
    I hope this is seen?
    - "You're worried about ;) First of all, we continue on our cuts ...."
    :eeek::eeek:

    [​IMG]


    - "bin quoi... :hehe: "
    what is the part of chassis!!!! :duh:
    - "the rear :) "
    and it remains what?
    - "this ;)"

    [​IMG]


    basically everything was cut :naughty:
    - "Basically it's this :D"
    it remains only amounts !!!
    - "Almost :D"

    [​IMG]


    - "But as you can see, after the holes ..."
    is recorks :eyebrow:
    - "With aluminum plates :)"
    you're really out of your mind !!! :eek:

    [​IMG]


    - "no, no! :D mind is fine , very fine :) "
    :eeek:

    [​IMG]


    - "Seriously, this allows us to implement our own cuts :)"
    :eeek: eh !!! is cut, it recorks to redraw !!!!
    - "Welcome to the modding :D :D :D"

    [​IMG]

    A bientot​
     
  8. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    we soon saw the establishment of the plates ....
    - "You're right we'll go over the details!"
    by "above" you speak of chassis
    - "Yes, of course! :p"
    ah! ok because there is more you that we see :D

    [​IMG]


    - "I don't know if the last time you noticed a party had not suffered the onslaught of the grinder"
    yes the top of the chassis, why?
    - "It's fixed :D"

    [​IMG]


    :eeek:
    - "The chassis is significantly lighter now :D"

    [​IMG]


    this is clear! we are only the amounts?
    - "Now, we see the introduction of aluminum plates :)"
    ok! and we start by....
    - "By the back of the chassis :)"

    [​IMG]


    them took a good slap :worried:
    - "It is true that we have not even the framework ... just those two amounts :D"
    you put the plate in place :)
    - "Yes and is positioned behind the amounts :)"
    all fixed by ....
    - "Screw and bolt :)"
    simpler than rivets :cooldude:
    - "Especially if you need to disassemble and reassemble the chassis :D"

    [​IMG]


    :eyebrow: you're still with the rear ....
    - "No! There is the front :)"
    okay ...

    [​IMG]


    and the plate?
    - "It takes place within the amounts :)"

    [​IMG]


    simple :)
    - "yes and ....no :rolleyes: "
    ah?
    - "We had to make some cuts to these small openings :)"
    okay! and we can't cork them?
    - "Well! no, the holes used to attach the fairing to the chassis ;)"

    [​IMG]


    next...
    - "the top :) "
    he already has a specific section :)
    - "Yes rectangular ....:D"

    [​IMG]


    and now you are with....
    - "plate :)"
    plate positioned inside :)
    - "Exactly :)"

    [​IMG]


    - "There were also a few openings ..."
    that correspond to passages clips fairing :)
    - "Small rectangles, small round ....:hehe:"

    [​IMG]


    it's good to put the plates, but now we must re-assemble everything :eyebrow:
    - "Quite well and see if it still coincides :)"

    [​IMG]


    the front part
    - "the rear part :)"

    [​IMG]


    the top :)
    - "no not yet :D "
    ah!
    - "and yes ... we will look at another plate :) "
    large plate :worried:

    [​IMG]


    I already told you that you were little :D
    - ":worried:"
    you seem lost in this immensity :D:D:D
    - ":("

    [​IMG]


    - "bref! .... this is not just an aluminum plate"
    :eyebrow:
    - "It is based on a thick acrylic plate :)"
    what for ....
    - "It will be seen later :D"

    [​IMG]


    it used to ....
    - "This is the motherboard tray :)"

    [​IMG]


    - "On the side of the backstage :)"
    a real wall :eeek:
    - "The base is in place :) we will pass the details now :)"

    [​IMG]


    you want to talk about interior design :rolleyes:
    - "foundations of the case are in place :)"
    thinking about the positioning of the components is fixed :)
    - "right :)"
    360 radiator at the bottom of the case
    - "Push / pull"

    [​IMG]


    BTX motherboard position :)
    - "Yes and here we must have a back plate :eyebrow:"
    :worried: it's true that the original back failed to get that plate ...
    - "We went to find an old box ...."
    This thrown :D
    - ":rolleyes:"

    [​IMG]


    we'll see how high the motherboard is positioned :)
    - "Small current debate :p"

    [​IMG]


    we leave on ....
    - "A small box :p"
    filled ....
    - "Steel of all kinds :D :D :D"

    [​IMG]
     
  9. Bad Fenny

    Bad Fenny New Member

    Joined:
    20 Aug 2014
    Posts:
    52
    Likes Received:
    0
    Interested to see where this goes and your assistant is definitely a talented worker.

    Cheers

    Fen
     
  10. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    thanks a lot bad fenny

    the next is here


    hello :D
    - "yep! :D "
    not hello....
    - "It's like, no :D"
    okay ... what we present today?
    - "We will focus on the rear of the chassis :)"
    and as we have seen, we went to retrieve a backplate :rolleyes:

    [​IMG]


    - "We could make one :D"
    euh ....
    - "But as we had this copy on hand :naughty:"
    we let's say it like that :rolleyes:
    - "For positioning the plate on the rear part of the chassis ...."
    we must first position the motherboard tray :)
    - "Here we go :thumb:"

    [​IMG]


    ok! we mark the backplate on the aluminum :)
    - "2-3 small holes to maintain :thumb:"

    [​IMG]


    - "And features cutouts are marked on the aluminum plate to access the rear of the motherboard"
    on this condition, we will be difficult to connect the devices :D

    [​IMG]


    - "A bit of a saw for cutting :cooldude:"
    a little bit of lime to catch the right line :D

    [​IMG]


    what are you doing with this profile aluminum?
    - "To hide some holes ;)"
    one that is your left foot :)
    - "Especially :)"

    [​IMG]


    you said a few holes :worried:
    - ":D I take this opportunity to fill two expansion ports :rolleyes:"
    I see that !!!

    [​IMG]


    :eek: :eek: :eek: what you want in your hand ???
    - "A cut :D"
    fine cut :)
    - "Smooth :)"

    [​IMG]


    - "lace, I would say :)"

    [​IMG]


    and cutting is for?
    - "Art Deco :)"
    it's true that we have not given the theme of the mod :D
    - "Oh, they'll figure it out for themselves ;)"

    [​IMG]


    you want to be framed :D
    - "No need to frame to put me in value :D"
    :eyebrow:

    [​IMG]


    - "tell me cuc', you can zoom in on me :cooldude:"
    ... how many times will I say that you are not you ....
    - "No it is not for me :p"
    euh ....
    - "Though :D ... but it's also to show that we have different milling holes :)"

    [​IMG]


    after the framework is a circle !!!!
    - "History of breaking the style :D"
    I hope at least that is useful
    - "Like putting me in value :p"
    but you just said .... I give up ....

    [​IMG]


    - "no more humor cuc' :p "
    ...
    - "okay! it is for this :) "

    [​IMG]


    - "But before...."
    we will prepare this item :)
    - "To make it in adequacy with the style :)"

    [​IMG]


    next?
    - "we went back to work :D"
    A +​
     
  11. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    Hello everyone :)
    - "Hello everyone :cooldude:"
    today ....
    - "We will move forward in the presentation of the work done :D"
    for sure! otherwise he will think we are at a standstill ....
    - "A ride on the bottom of the case :)"
    was somewhat removed from the plastic to have something flat

    [​IMG]


    - "we mask :)"
    our work ???
    - ":naughty:"

    [​IMG]


    - "No! this is a trick to locate the fans ...."
    develops Xray! develops!
    - "One hand on the implementation of the 360 radiator on the bottom of the case :)"
    and we saw that it fits nickel in the bottom's fairing :thumb:
    - "We put in place the fans on the radiator and I put a little bit of pencil on screws :)"

    [​IMG]


    - "And ...."
    and ???
    - "And before the felt dry, I positioned the radiator and I press ...."
    you press?
    - "We press :D to realize the marking of the position of the screws :)"
    :thumb: cool!

    [​IMG]


    we have reference of the screw holes but not for the fans themselves ....
    - "A landmark begets another :)"
    ok! we find the center of the circle and presto!
    - "Hop! and is cut :)"
    given the configuration of the fairing, it was necessary to use the drill and lime :blush:
    - "Rapidly performed by the plastic work :thumb:"

    [​IMG]


    - "setting in situation fans :)"

    [​IMG]


    - "We're going to see the establishment of a filter element ..."
    otherwise hello dust :D
    - "Should not be the case turns into a vacuum :D"

    [​IMG]


    and there?
    - "A small cut on aluminum plate :)"
    euh .... it is clear to cut .... it is rather the function of the thing I want t know....

    [​IMG]


    - "we positioned the radiator with fans on push-pull :)"
    and plate ???

    [​IMG]


    - "we put in place to cover the base of the cutouts of the chassis :)"
    a hidden misery ...:D
    - ":rolleyes:"

    [​IMG]


    next?
    - "soon :D"​
     
  12. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    and we are back :)
    - "We do not hang today :D"
    :D
    - "After the establishment of the radiator, we will not leave it all well :)"
    no! of course! :)
    - "so we take a cardboard :)"
    a cardboard ????

    [​IMG]


    - "As we do not handle apps like Sketchup .... nothing like a cardboard cut-outs to preview :naughty:"
    :hehe:

    [​IMG]


    - "Now we know the size of the aluminum plate cut out :)"
    us cut out! :p

    [​IMG]


    - "We have already seen for locating the position of the fans ..."
    and therefore for cutting openings ...
    - ".... On the aluminum plate :)"

    [​IMG]


    but the plate is flat!
    - "It's better to make the cut :cooldude:"
    it is how to make the shroud?
    - "The bender that goes well used :naughty: ....:D"

    [​IMG]


    another cutting ???
    - "Yes :)"
    ah !!!
    - "On an acrylic plate :)"
    and the blue stuff?
    - "to facilitate cutting ;)"

    [​IMG]


    -"we reduce the size of the plate :)"

    [​IMG]


    - "And adjusted as close openings :)"
    ???? :eyebrow: :eyebrow:

    [​IMG]


    this is for training?
    - "Not really :p"
    why then ???
    - "We will see this later :D, first we will look at this cardboard :)"
    another one?
    - "yes but package :D"

    [​IMG]


    and there is?
    - "Wrapping mod :)"
    :jawdrop: :jawdrop: :jawdrop:
    - "Tadaaaa !!! :)"

    [​IMG]


    leather!
    - "100% :)"
    several aspect of brown :)
    - "A bit of nuance, indeed :) we return to our fairing ;)"

    [​IMG]


    - "A neoprene adhesive layer on the plate and on the leather :)"
    fine layer :)
    - "As much as possible if we want something flat :)"
    the best is the bomb glue...
    - "But we want a little relief, so the "raclette" is used :)"
    I love raclette :D
    - "Okay ...."

    [​IMG]


    - "I skin folds on the other side of the fairing :)"
    with a cut star for openings fans :)
    - "And that's where I put up the acrylic sheet"
    to keep the folds :)
    - "Among other things but that is not its main function ;)"

    [​IMG]


    the wire puts us on track :)
    - "Then plug :)"
    go!

    [​IMG]


    I turned off?
    - "yes! to better reflect the light diffusion :)"

    [​IMG]


    but tell me Xray!
    - "Yes ...."
    you have not made a cut too ....:D
    - "Too much?"
    what you have on the back :whistling:
    - ":) what do you think about?"

    [​IMG]


    - "Still dreaming of a leather jacket :p"
    the cut is poor :rolleyes:

    [​IMG]


    - "Bah! I think it suits me :)"
    nothing dress you Xray! nothing dress you :D
    - "There's nothing to say :hip:"
    more with the red shorts ....
    - "Class :hehe:"

    [​IMG]


    Returning on the mod ....
    - "You're right :)"
    the wooden board with the name of our sponsor that is a cut?
    - "not exactly! you missed one detail :)"
    which?
    - "The brass rod at my feet :)"

    [​IMG]


    and then ....
    - "The board will be my model actually :)"
    if you say so ....
    - "And you'll help me twist the stem in every way :D"
    okay
    ......
    a good time is going
    ......
    .....
    - "And here is the result :)"

    [​IMG]


    cool :) but what have you in your hand? a ring?
    - "A ring?"
    then a bracelet ....
    - "Bracelet ????"
    after the necklace, I expect everything with you :D
    - "No! you're not there at all ...."

    [​IMG]


    - "it is the point of be quiet :)"
    okayyyy

    [​IMG]


    how do you hold this?
    - "With a brass wire :) and discreet hole through of the fairing to pass the wire ;)"
    :thumb:
    - "Soon :)"​
     
  13. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    no time to lose! we continue :D
    - "It's an avalanche of update :D"
    This is what can be :)
    - "At least that is almost finished ;)"
    and there it is ....
    - "from the top of the case :)"
    which was plugged the holes with mastic

    [​IMG]


    - "sanded and sanded and sanded again ....."
    masticated again ....
    - "I still sanding then?"
    must you need :D
    - "So we plugged the holes of the front panel :rolleyes:"

    [​IMG]


    - "holes for superior ventilation of the case :)"
    no more upper ventilation !!!
    - "don't worry :D"

    [​IMG]


    - "You know we love reseal the holes ....:hehe:"

    [​IMG]


    - "To make others :hehe: :hehe: :hehe:"

    [​IMG]


    superior ventilation is again up :thumb:
    - "We will not let these holes as well :)"
    nothing like a grid :)
    - "Custom :)"
    the cutting plotter is useful to realize the cutting pattern :)
    - "It simplifies the task :p"

    [​IMG]


    a good small time on a scroll saw ....
    - "We should not miss :D"
    Yes! take your time is obligatory :cooldude:

    [​IMG]


    - "A small setting in situation :)"

    [​IMG]


    it is fixed with ....
    - "Screw and bolt brass said one-eyed :D"

    [​IMG]


    we ended up with the top of the case?
    - "not yet ;)"
    ok and we go on ....
    - "the fan controler that goes well :)"
    special dedicated to the theme of the mod :thumb:

    [​IMG]


    - "We undressed"
    4 small holes are made :)
    - "The difficulty is the alignment of these openings ...:p"
    tip top :thumb:

    [​IMG]


    - "We need to see or not if we make holes for the LEDs Rheobus ..."

    [​IMG]


    - "The radiator 360 takes position at the bottom of case"
    we saw it ....
    - "then the supply takes place elsewhere ...."
    then of course! :p
    - "And therefore no more access to the mains connection ...."
    ouch! not false ....
    - "So we invest in a remote :)"
    :thumb:

    [​IMG]


    - "And positioned on top of the case :)"
    ah! Why?
    - "Because the power given to the top also :) at least its back"

    [​IMG]


    it's all good now :)
    - "not yet :laugh:"
    :eyebrow:
    - "There is a hole that is not plugged .... "
    :eyebrow:
    - "The start button :)"

    [​IMG]


    and do not let him as ....
    - "Oh no! :D"
    a small cut on acrylic plate shaped gear ....
    - "Oh yes! :D"

    [​IMG]


    but the button is square !!!!
    - "That's why we made a cut to our internal gear ;)"
    :thumb: :thumb: :thumb:

    [​IMG]


    this time it's over?
    - "Until next time ;)"​
     
  14. Hukkel

    Hukkel James' minion

    Joined:
    20 Dec 2012
    Posts:
    1,284
    Likes Received:
    25
    I am Always subbed for a Cucmag build :clap:
     
  15. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    thanks hukkel :)
     
  16. Ianovski

    Ianovski Rawr!

    Joined:
    10 Mar 2011
    Posts:
    208
    Likes Received:
    21
    New build from Cucmag omg omg omg omg omg!
     
  17. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    :hehe: :hehe:
    thank you Ianovski
     
  18. perplekks45

    perplekks45 LIKE AN ANIMAL!

    Joined:
    9 May 2004
    Posts:
    6,445
    Likes Received:
    729
    Nice build so far. The real highlight for me, though, is the slightly insane yet highly entertaining style of your log.

    Keep it going! :thumb:
     
  19. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    a crazy touch... no more :hehe:
    thank you perplekks45
     
  20. cucmag

    cucmag New Member

    Joined:
    31 May 2014
    Posts:
    125
    Likes Received:
    0
    good morning and good weekend :)
    - "Hello :) here we have sunny day :p"
    :rolleyes: ... otherwise Xray that we present today?
    - "motherboard :)"
    euh ... ok .... but we did not already presented ...?
    - "then yes ... but I wanted to once again show :D"
    ah ....
    - "Yes one last time before ....:D"
    before .... :eyebrow:
    - "What is the purpose of today's post :)"

    [​IMG]


    - "And at first, we take care of sinks :)"
    both are removed :)

    [​IMG]


    :eeek: the bottle !!! is for ????
    - "sinks :)"
    ah! and?
    - "we will clean things up a bit in depth with this bottle of lye ;)"
    laundry ???
    - "a recommendation from a friend ;)"
    you manage?
    - "you're worried about :D"
    ok ...
    - "you just keep an eye ... if not you have no anodizing and aluminum material too ...:D"
    :confused: :confused: :confused:

    [​IMG]


    - "sink of mosfets is the first to go to pot :D"
    the red parts are actually doing "trempouille"? :D
    - "no ... I actually taking them out ..."
    :eeek:
    - "No need :p"
    downright ...
    - "Yes :D"


    [​IMG]


    - "I keep removing the light part ..."
    what a surprise!
    - "Oh :eyebrow:"
    you who usually like light effects
    - "Yes, but not here :D"
    but! but !!!! what are you doing ????
    - "Small pieces :D"

    [​IMG]


    bah why ???
    - "better to have my new pieces :rolleyes:"

    [​IMG]


    - "3 mm aluminum plate :)"
    saw cut a scroll :)
    - "It heats! it heats!!! :D"

    [​IMG]


    - "and here my little cut and sanded pieces :)"
    you did not like the scratch mommy dragon ...:D
    - "there is a bit of that :D but mostly it will be fine with the mod :thumb:"

    [​IMG]


    - "look, if it's not good way :)"
    is left as?
    - "for now ;) we will now move to another one"

    [​IMG]


    sink of chipset :)
    - "exact :)"
    we take away the small plate that is in contact with the chipset of the motherboard :)
    - "and it's ready to hang her bath :D"

    [​IMG]


    - "better than decap oven :D"
    :thumb:
    - "there is the imprint of the badge ...."
    :unsure:
    - "we will take care later ....:)"

    [​IMG]


    ok! so you take now this acrylic plate
    - "quite :)"
    and that is ....
    - "draw lines :D"
    super ....:eyebrow:

    [​IMG]


    - "Yes, but not only ...."
    I see that as cutting :)
    - "following draw lines :D"

    [​IMG]


    - "and we end up sanding plate :)"
    not really transparent ...
    - "not matter ;)"

    [​IMG]


    I think it all coincides with the elements of the motherboard :)
    - "upwind hair :p"
    big hair then :D
    - ":D :D :D"

    [​IMG]


    returning to our sink :)
    - "I stuck it a little filler to smooth the surface :)"

    [​IMG]


    - "then it's leather operation :thumb:"
    with double-sided tape :)
    - "I would rather not try the glue on this acrylic plate :)"
    it is better safe side :)
    - "especially after all the cuts ..."

    [​IMG]


    but tell me!
    - "I'm listening ...."
    speaking of cuts
    - "Ouiii ...."
    thou hast taken away!
    - "Ah you think!"
    more than believe! I am sure :eyebrow:
    - "Ah, if you say so ....:D"

    [​IMG]


    now what?
    - "we take care of the rear modules on the motherboard :)"
    bah! there is integrated fairing at this level :rolleyes:
    - "Yes! nickel for the top view :) but on a rear view ...."
    it's not false :)
    - "blow masking operation ..."
    followed by painting operations :)

    [​IMG]


    tell me!
    - "I'm listening again ...:D
    we must not forget the module wifi and bluetooth combo
    - "It dries :D"

    [​IMG]


    - "A little black on the plastics :)"
    :confused: not easy with all those blue and red ....
    - "we want to apply color match but it does not help us spot ..."

    [​IMG]


    ah well better once painted :thumb:
    - "I did not intend to leave them raw aluminum :p"

    [​IMG]


    wow! :eeek: :eeek: :eeek:
    - "It throws :D"
    all those little cogs ... !!!
    - "since the motherboard disappears under its fairing :rolleyes:"
    and then it coordinates well with the style of mod
    - "A clockwork dragon :D"
    it gives time ???
    - "Still not :D"

    [​IMG]

    what this?
    - "another ... no... four other things that will take place on the motherboard :)"
    at least the shell :D
    - "Red :D"
    which means they will take a bath also :D
    - "once the stickers removed :)"

    [​IMG]


    then it's paint :)
    - "Which is not bad as it is the black PCB :naughty:"
    clear :)

    [​IMG]


    I do not want to be flip joy ... but you do not have a defect in the paint
    - "Ah you saw ...."
    I would have a hard time not seeing :D
    - "OK, it is not bad :)"
    not bad ???
    - "yeah, I think it's nickel to have this defect :) it gives a hand hammered copper :D"
    :eek: you know bounce off your misses, you !!!
    - "this is what is called fit :D"
    and that's how you **** varnish and finally we get a top tip effect :p
    - ":D :D :D"

    [​IMG]


    have a nice weekend :)
    - "see you soon :)"​
     

Share This Page