Sunbeam PSU tart tastic

Discussion in 'Article Discussion' started by Cheese, 4 Aug 2003.

  1. Cheese

    Cheese Doc

    Joined:
    6 Oct 2001
    Posts:
    4,609
    Likes Received:
    1
    Taking to a PSU armed only with a couple of products from Sunbeam and a can of paint, I'm fearless as ever...

    {param}


    Click on the picture to read our review/article thingie :)

    Comments/questions?

    Rob.
     
    Cheese, 4 Aug 2003
    #1
  2. A13n0rma1

    A13n0rma1 Wannabe

    Joined:
    17 Jul 2003
    Posts:
    830
    Likes Received:
    0
    PSUs should just come in that matte black color. Seriously.

    Were those acrylic grills 1/4" thick?
     
    A13n0rma1, 5 Aug 2003
    #2
  3. Cheese

    Cheese Doc

    Joined:
    6 Oct 2001
    Posts:
    4,609
    Likes Received:
    1
    Good point, I should have mentioned that in the review - the 'CS' grill was 1/4" and the fan grill 1/8" IIRC :)

    Cheers,

    Rob.
     
    Cheese, 5 Aug 2003
    #3
  4. Tau

    Tau Sharingan!

    Joined:
    17 Nov 2002
    Posts:
    304
    Likes Received:
    1
    I assume in order to get all the 240V connectors out of the case you had to desolder them? I looked at doing this before, but i really didn't want to unsolder things in case I couldn't remember where all the wires went :D
     
    Tau, 20 Aug 2003
    #4
  5. Cheese

    Cheese Doc

    Joined:
    6 Oct 2001
    Posts:
    4,609
    Likes Received:
    1
    Nope, only soldering I did was for the fan grill...

    Rob.
     
    Cheese, 20 Aug 2003
    #5
  6. Tau

    Tau Sharingan!

    Joined:
    17 Nov 2002
    Posts:
    304
    Likes Received:
    1
    Hmmm, you must truly be a wizard then and conjured it out....

    I'll have to have another look and figure it out, failing that, a hacksaw :thumb:
     
    Tau, 20 Aug 2003
    #6
Tags: Add Tags

Share This Page