Case Mod - Complete Super Sport GT car tribute PC build

Hello friends,

I'm starting a new project and it's time to start this year with a dynamic PC mod/build. The project will be dedicated to GT sports cars, the interior will be associated with the engine under the hood of the car, and the exterior, of course, in the bright colors of speeding cars

This is my new "office" machine. Yes, it might sound funny, but I have to please myself too!

Hardware:

Raijintek PanSlim case
Asus ROG Strix Z690i Gaming WiFi motherboard
Intel i9 12900k
Asus ROG Radeon RX 5700XT graphics
Patriot Viper DDR5 Elite5 48G 6600Mhz RAM
Patriot Viper VP 4100 1Tb m2
Cooler Master SF 850W power supply
Cooler Master SF 120M fans
EKWB 2x Surface S240mm slim radiators
EK-Quantum HDC Titanium fittings
EK-Quantum Velocity² DDC 4.2 PWM D-RGB
CableMod custom cables for PSU
etc...

Photo teaser and let's go.....

 

Good to see you back.

 

I come back seasonally, like the flu

 

Just a word of warning, don't use that PSU, it is insanely loud.
Everyone I know with one, has had a nightmare with it even on minimal load sat at idle, it sounds like a jet engine!

The V2 version did not fix the problem, it is also extremely poorly/cheaply made and the cables are stupidly long and terrible quality.

 

I think it's included for the CM case mod competition.

 

Ah damn, sorry to be the bearer of bad news! Do you get to keep it afterwards? If so just fit a silent sfx psu afterwards haha!

 

Hi, I don't have problem with this PSU, this is not my first. Currently I use one in my main PC and everything is fine : https://forums.bit-tech.net/index.php?threads/gp-project-by-nessa.386297/

About cables, I always use custom cables

No is not, but good idea, if that competition still happens

 

Monolith-mode incoming. I had a feeling the Ikea feet would be removed anyway.

 

Defined arrangement of hardware inside the case...

 

Parts for water cooling:

EKWB 2x Surface S240mm slim radiators
EK-Quantum HDC Titanium fittings
EK-Quantum Velocity² DDC 4.2 PWM D-RGB

 

In the project, I will use old but really outstanding Cooler Master fans that also fit visually!

 

Narrowly passes

 

Nope! -Custom panel "vent".

 

It's time to mount the water cooling blocks

 

Patriot Viper DDR5 Elite5 48G 6600Mhz RAM

Patriot Viper VP 4100 1Tb m2

 

Fittings orientation and preparing for tubing...

 

Drain and fill port installed:

 

tidy work!

 

Copper tubing

 

I made the feet, handle, the acrylic windows and the masks, brought out the external cable for the PSU and inserted the display ...

PS. all copper tubes is powder coated in RED