Well we need one to share our pictures and discuss our sleeving addiction. Some images I found on my PB. More will be along tomorrow
I literally just finished my first ever sleeving I am slightly concerned about the shrink curling up at the ends, don't know if I applied too much heat or too little... These are for my Obsidian build that I started today.
They don't look too bad, it's certainly not awful. Mine have a tendency to do that and I just rip the heatshrink off and start again.
I don't mind a little extra curl if it's on parts that are hardly visible (or completely hidden). I use a lighter, so extra heat is pretty much a given.
This is AC ryan sleeving. The smallest sleeve in the kit. I used my shrinktube because the supplied one wasnt getting small enough. Here a picture. Top: 3x header (pwr, led, hdd led), Bottom: Sleeved USB cable, also with AC ryan sleeve. Here my heatshrink skillz
Here's my attempt from about a year ago: That's the ACRyan sleeving kit. It's not too bad, but the cables show pretty well through it.
I have some stuff with Techflex on it, cables are pretty visible. I have only done a 24 pin and 8 pin (alternating white/black, white sleeving with black shrink and black sleeving with white shrink alternating) and colours are REALLY obvious.
@[ZiiP] NaloaC - Cheers Dude @talladega - My spelling sucks , for a bigger image, i can't do it sorry, as it is such a tight crop already. The image quality would be rubbish.
I'm working on some more, i just need to have the sun in the right place, with certain strength. But i will post up more once i have taken them .