1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Tribal's case - Christmas update hehehehe 13/12/2007

Discussion in 'Project Logs' started by Rodrigo Vicentini, 30 Apr 2006.

Thread Status:
Not open for further replies.
  1. Rodrigo Vicentini

    Rodrigo Vicentini What's a Dremel?

    Joined:
    30 Apr 2006
    Posts:
    90
    Likes Received:
    4
    fastening the hinges of the door:
    [​IMG]

    as it will be, it is very well hidden.
    [​IMG]

    I will use those buttons with magnet used in bags: D the door is well locked.
    [​IMG]

    fastening one of the parts in front of the case. and making some adjustments
    [​IMG]

    fastening the magnet in the door of the case, I glued him with acrylic:
    [​IMG]
    [​IMG]
     
  2. Rodrigo Vicentini

    Rodrigo Vicentini What's a Dremel?

    Joined:
    30 Apr 2006
    Posts:
    90
    Likes Received:
    4
    open door and fastened:
    [​IMG]

    closed door and fastened:
    [​IMG]
    [​IMG]
     
  3. ledbythereaper

    ledbythereaper What's a Dremel?

    Joined:
    2 Jan 2007
    Posts:
    131
    Likes Received:
    1
    Thats some damn good molding work going on there, I think the skulls turned out just as good as the original
     
  4. 500mph

    500mph The Right man in the Wrong place

    Joined:
    22 Jun 2007
    Posts:
    2,129
    Likes Received:
    32
    that is some amazing work you have done there. 5* from me.
     
  5. Rodrigo Vicentini

    Rodrigo Vicentini What's a Dremel?

    Joined:
    30 Apr 2006
    Posts:
    90
    Likes Received:
    4
    ledbythereaper, thank you for the comment, the skull was beautiful same (modest me hehehehe)

    500mph, thank you for the 5 *, I am happy that you have liked my work
     
  6. Rodrigo Vicentini

    Rodrigo Vicentini What's a Dremel?

    Joined:
    30 Apr 2006
    Posts:
    90
    Likes Received:
    4
    I set up the case for seeing how it would be, but I noticed an unevenness between the front and the foot, then I put a piece of acrylic of 3mm to compensate this. after cutting I had to do some adjustments with acrylic resin to fit perfectly.
    [​IMG]


    everything finished and sanded, the holes of VUs also done already.
    [​IMG]


    I didn't like holes as they were, then I decided to tilt the angles, the result was good, taking into account that I made everything only with the dremel:
    [​IMG]


    Test with VUs in the places:
    [​IMG]
    [​IMG]
     
  7. Flixified

    Flixified What's a Dremel?

    Joined:
    8 Nov 2007
    Posts:
    17
    Likes Received:
    0
    Is it me or is the second hole along smaller than the others?

    Looking very good so far mate!
     
  8. Rodrigo Vicentini

    Rodrigo Vicentini What's a Dremel?

    Joined:
    30 Apr 2006
    Posts:
    90
    Likes Received:
    4
    you are right, the second hole is smaller because there it goes is the place the power button, that will also be personalized. the first hole and for VU of HDD. thank you for the comment :rock:



    :dremel: some pictures of the front general vision:
    [​IMG]
    [​IMG]
    [​IMG]
     
    Cheapskate likes this.
  9. specofdust

    specofdust Banned

    Joined:
    26 Feb 2005
    Posts:
    9,571
    Likes Received:
    168
    Thread closed as per OP's request.
     
Tags:
Thread Status:
Not open for further replies.

Share This Page