Several firsts for me here... First watercooled build, first worklog, first new thread at Bit-Tech even. I've been reading for quite a while though, so I'm pretty sure I have all my stuff straight as far as the w/c stuff goes. On with the pics! Helo thar DangerDen RBX waterblock. DangerDen GFX block, black of course. Bay reservoir. Eheim pump, bigger than I thought Radiator, with shroud and aluminum fan. Case, dissected. Pile of parts, minus video card (NewEgg sent the wrong one, gg.) P4 2.8c, IC7-MAX3. Should be decent overclocking pair. Mounting radiator in the case. Of course, this will leave only one 5 1/4 bay open Radiator mounted, solid as a rock. I can pick up the entire case with it. It's not going anywhere. Just enough clearance here... Outside of the case, with the front on. The top has been masked off, as a breathing hole will need to be cut for the radiator. Design pending. Approximate pump location, I haven't decided for sure whether to mount it this way, or turn it around so I can get it closer to the drive cage that goes up front there. Apparently I'm the master of blurry pictures, this is my workspace (parents' garage). I know, I know, but I don't have enough room in my apartment for this. Rest of garage. Yes, it's that big. There's a storage area above the workbench also. The end, until this weekend. Expect an update.