Modding what can this be mod into?

i was making my own case, but i dont like the way it turned out, and now i left with the part in the pics.

anyone have any ideas what can i mod it into? like add some parts to make it look like something

 

what are the dimensions?

im thinking put a old AT PSU in the smaller section and putting insulation aswell as a door on the larger section. add a few peltier plates and you have a nifty little fridge

 

the lower secetion was decided to fit in a psu, and the large section can fit all mobo, cdrom, hdd and such

 

Make it a CRT with a TFT in the front so its the whole computer. Boring but thats what came into my head

 

big evil robot face?

 

CRT idea is cool, but i plan to put cdrom exit in the front, its hard to cut the tft
evil robot face? how?

 

I read thats as "the lower secretion"


Man... what a typo.. lol.

 

its "the lower section" ^^'

 

the lower section would be the neck then u make the upper bit into a face then make it evil

 

Evil face? No way, man! No way!

That's totally a mech. Or even a mecha, if you want. What you've got there is the torso (big box being the chest, little box being the hips). Put some nice legs on there, some arms, and a head (and you just KNOW you've gotta pop some LEDs in there for eyes (glowy eye power LEDs?) and you'll be set. I'm thinking a rather Optimus Prime looking head for this one.

I'll draw up some pics later, but what do you think of that?

 

mech was my original idea

but after i made everything, it doesnt turn out well and its BIG

 

that pic dont look too bad.. the way i design my models is import some components and arrange then in the way i want the to be set out then design something around it..

 

why not do the mech idea?

you could put the monitor between his legs and even a light on the nose overhang for late night keyboarding.

plus you could make the cannons rise up and blast the person in front of you with compressed air at lans.

 

lol well it looks like you just need more practice with skecthup


(edit saw robot at bottom)

umm id say a face or a gundam face or something

 

turn it upside down..., put the PSU at the top (small bit), mount the CD drives at the front (either horizontally or vertically), then put a front panel/control panel up the top. Add some toggle switches (turn fans on/off maybe) or something, get a push button, create a glowing red perspex box make it 'ignition' then add a yellow and black striped on called eject (reset) and you've got yourself a Military Style PC

 

here is wut i had done



it looks very ugly on side



so should i keep what i had done and modify it or completely do it over?

and steakthemoocow, wut do u meant by "edit saw robot at bottom"?

 

1) I didn't say that
2) I think you should just take out the torso, flip it, add front switches to your lower torso area (as stated above)

 

ops..
it was infraggable krunk *^.^*