Cooling What HW Labs radiator??!!??

Discussion in 'Hardware' started by SFOD-D LoneWolf, 2 May 2004.

  1. SFOD-D LoneWolf

    SFOD-D LoneWolf What's a Dremel?? :p

    Joined:
    10 Apr 2004
    Posts:
    858
    Likes Received:
    0
    I wan't to get my self a radiator from HW Labs, the question is...which one :hip:

    My soon-to-be setup:

    Danger Den Maze4 SHD AMD Athlon block
    Eheim 1048 water pump
    Innovatek Tank-O-Matic
    HW Labs *insert rad here*

    It will be fitted inside a Chiedtec Matrix Medium tower or a Chieftec BX medium tower.


    Cheers,
    Mike

    P.S.
    What I came up with:

    Black Ice Micro or Black Ice PRO
     
  2. olv

    olv he's so bright

    Joined:
    23 Sep 2002
    Posts:
    3,333
    Likes Received:
    1
    go for the extreme if you can afford it, it's a very capable rad and performs nearly twice as well as the Pro.
     
  3. SFOD-D LoneWolf

    SFOD-D LoneWolf What's a Dremel?? :p

    Joined:
    10 Apr 2004
    Posts:
    858
    Likes Received:
    0
    I think that the Extreme might be an overkill for a one-block system



    Cheers,
    Mike
     
  4. olv

    olv he's so bright

    Joined:
    23 Sep 2002
    Posts:
    3,333
    Likes Received:
    1
    Not really, the closer you can get the water temp to ambient temp the better, no matter how many blocks you are using. Plus if you add in a GPU block or NB later on a pro or micro would start to struggle.
     
  5. SFOD-D LoneWolf

    SFOD-D LoneWolf What's a Dremel?? :p

    Joined:
    10 Apr 2004
    Posts:
    858
    Likes Received:
    0
    Well, the Extreme is a tad off my budget, I'd rather stick to the Micro, Micro2 and the Pro :p

    And I doubt I will get a chipset block, they don't get THAT hot :rock:



    Cheers,
    Mike
     
  6. Pug

    Pug What's a Heatsink?

    Joined:
    16 May 2002
    Posts:
    945
    Likes Received:
    2
    I hear the new BI Pros (with G1/4 thread for interchangeable fittings) are going pretty cheaply nowadays if you know where to look... :thumb:
     
Tags:

Share This Page