Cooling Will my EK Suprme HF waterblock fit SKT2011?

I have this one which is used on my setup. Skt 1366.
http://www.scan.co.uk/products/ek-supreme-hf-acetal-water-block-for-all-socket-cpus



Thanks,

Simon.

 

With ROG X-socket, yes

 

Thanks mate! -I'm going back to Asus (Maximus Extreme) for my main board, so that's good to know.

Cheers.

 

Rampage IV Extreme and Formula have X socket in the box

 

Cheers, Oops, I meant Rampage Extreme. (Maximus was the old naming)

Thanks again.

 

You'll probably need the new mounting bolts to get the correct tension.

 

I did see this, but those bolts are for the newer HF supreme block. My bolts are threaded right through.

Anyway, I have now jumped ship to Skt 2011. Order placed, and expected on Tuesday.

 

It's worth checking with EK. You may need to add 2mm spacers to get the right tension with the stock bolts.

Edit: You mean the nut's are threaded the whole way through?

 

This is what you are saying.

I'm saying my bolts are proper screws, threaded from head to tip. So I can screw my bolts into the socket mounts and use a nut to apply pressure on the spring and block.