Hey Guys!! My name is Bruno, i live in Brazil, I come here to present my project for everyone. Sorry for the English. This project was sponsored by Thermaltake Brazil and Ttesports. The project is finished, I will show the photos of the progress... Hardware utilizado no projeto Thermaltake Element V Nvidia Edition MoBo Asrock Fatal1ty Professional CPU i5 2500K Hydro Cooler Thermaltake Water 3.0 Extreme 8GB RAM G.skill RipJawsX 1600 HD 1tb S. Barracuda Sata III SLI GTS 250 512mb Core Edition PSU Tt Smart 800W This is the original case: Some more photos of the progress. Marked cuts in plates Made CI VU metter to use them as rhythmic sensor Extensors in the theme colors LEDs Power and reset before the green, now in white Some grills for 120mm fans Cut the GT logo Applied carbon fiber in the GT logo Paints for plastic red, blue and white to the edges of the case and clips Cables from the case sleevados panel The front of this case already beginning to take shape And finally, step by step drawing I made the right plate of the case, I hope it gets good! Chapa cortada AlgumaS peças que irei adicionar, todas da THERMALTAKE. Updates Painting with some imperfections, improving with time I will .. I will make a scheme for turning on / off the LED fans. Stalls will be blank acrylic Y cable to plug p2 See more ups, sharper pictures soon! Finally my case is taking shape! Playing with the lighting in my case now, I'm hoping to get the bars to close the neon lighting. Backplate of the VGA's finished Now we're talking! After buying a new camera, and completely finish my case, follows the real photos I hope you enjoy!
Thanks so much, Craig. Have been complicating the clean look using 4 different colors, but in the end, had a satisfactory result.